Intel vs AMD

Inane baanter or words of wisdom - you decide...
User avatar
Kon-Tiki
Baaaaaaa!
Baaaaaaa!
Posts: 5594
Joined: Fri Jan 07, 2005 9:54 pm 0
Location: Inside my BO
Contact:

Post by Kon-Tiki »

Putting in an AMD or putting in an Intel doesn't seem to be any much difference to me. I mean... my comp now's my first comp I built myself, and using an AMD. First time I put a CPU on a mobo, and it went fine from the first time. Just wondered where to put the coolpaste, but that was all. If you use common sense, it's as easy as eating blueberry pie. And that's easy.
User avatar
mattley
Baaaaaaa!
Baaaaaaa!
Posts: 6253
Joined: Thu Aug 01, 2002 3:50 pm 0
Location: Watford
Contact:

Re: Intel vs AMD

Post by mattley »

Potts wrote:If I'd more experience of building PC's I might 'take a chance' on an AMD,
It's not a building issue, There's nothing in it heatsink fitting wise. (Both a bit shit IMO, but both work if used properly), and RAM just goes in and SATA is so hard to get wrong.

It's a 'I plug other shit into my machine' issue. AMD really MUST get their own MoBo, chipset and BIOS in house.
vi vi vi the text editor of the beast.
User avatar
Mr Dom
Baaaaa!
Baaaaa!
Posts: 1375
Joined: Fri Dec 03, 2004 3:03 pm 0
Location: Cardiff

Post by Mr Dom »

I would reccomend AMD every time.

BUT - Go for a Sempron (old 32bit Athlon). Don't touch the Duron (or Intel Celerons for that matter) wth a barge pole. The lack of cache makes them a real waste of space. If you want bang for buck, then look at the prices - there is a 'curve' generally with the newest ones at stupid prices, lowest ones really cheap, and the best bargain usually about 50-75% extra on the bottom price (around half the price of the top one). Probably not worth a 64bit Athlon yet (wait a couple of years before anything takes real advantage of it), and now they have come out the Semprons get an extra discount :)


Mind you, the biggest performance gain you are likely to see will be from the bus & memory speeds - so try to get 400MHz memory, 333 at the very least, and 512MB at the very minimum (preferably 768 - its very cheap nowadays). Oh, and you'll need a MB to handle it, but I think they all do these days.

Finally, try & get a 'matched' set. Novatech (UK company) do MB, CPU & RAM as a bundle. You save some cash, and they make sure it works before shipping :)

As a final final point - don't be fooled into paying bucks for OTT cooling. Athlons are tolerance rated to 90C. Mine runs at 60C most of the time but never had a single problem with it. Beware the snake-oil merchants.

PS: Overclocking is for the type of people who stick little blue lights & big exhausts on their Ford Ka's :P
- Dom
Play Games
<Haircuts are for wimps!>
User avatar
Kon-Tiki
Baaaaaaa!
Baaaaaaa!
Posts: 5594
Joined: Fri Jan 07, 2005 9:54 pm 0
Location: Inside my BO
Contact:

Post by Kon-Tiki »

My comp runs smoothly, even though mobo's from ASRock and CPU's AMD Duron. Actually, the cache-thing's an unsoldered bridge on the chip itself. Read an article 'bout it once, where they made a Duron 1600 (my chip) into an Athlon somethingsomething with 256Kb cache by soldering one single bridge. 75% chance of succeeding. Still not enough for me to risk it, especially with my soldering skills. Also got an entire modded case, as I was too cheap to buy one and it didn't fit in those old 286 cases. Pull out little empty wooden cabinet that's only used to support a monitor, put the hardware in it and you're done. The overclocking was accidentally. Thought to put the FJB jumpers to the same number as my Ram (333), as I didn't know what it was for, but the manual stated the same numbers I saw on Ram. After that, my software kept recognizing my CPU as 2GHz :lol: This all doesn't mean I'm putting blue lights under a Ford Ka, though.
User avatar
teamonkey
Sheepie Whore
Sheepie Whore
Posts: 12082
Joined: Thu Jun 13, 2002 1:07 am 0
XBL Gamertag: itsthetaste
PSN: teamonkey_ca
Contact:

Post by teamonkey »

Mr Dom wrote:As a final final point - don't be fooled into paying bucks for OTT cooling. Athlons are tolerance rated to 90C. Mine runs at 60C most of the time but never had a single problem with it. Beware the snake-oil merchants.
AMD64's run much cooler. Mine almost reached 50C while playing HL2 the other day. Almost made the CPU fan wake itself out of quiet mode. :)
User avatar
Potts
Baaaa!
Baaaa!
Posts: 901
Joined: Fri Jan 31, 2003 2:49 pm 0
Location: jivin' with the cosmik debris

Post by Potts »

Thanks for the good advice. Duly noted.
Mr Dom wrote: PS: Overclocking is for the type of people who stick little blue lights & big exhausts on their Ford Ka's :P
:lol: Small improvements can be quite easily gained. But some people do go far too far, and the market is chock full of shit for them to buy.
I was at Ce-Bit last year and the amount of Far-East tat for people to buy was amazing.

Potts
User avatar
Max_Sterling
Baaa!
Baaa!
Posts: 378
Joined: Sat Jan 17, 2004 10:28 am 0
Yahoo Messenger: anaran55
Location: SDF-1

Post by Max_Sterling »

I would say go with the AMD chip for every day use and general gaming use. If you have the money to spend - buy Intel.

My latest personal computer is AMD, and the computer I build before it was a dual-proc. PIII system. Both worked marvelously and did everything I asked them to do. The only reason the PIII system is out of commission is because the motherboard went bad after a couple of years.

I usually give Intel the edge for video processing and some programs that are specifiacaly compiled to take advantage of the Intel chipsets. Otherwise AMD generally gives a lot more bang for the buck, and you can spend the money you save on a nice video card.
User avatar
Stevo
Baaaaaa!
Baaaaaa!
Posts: 3545
Joined: Mon Jan 12, 2004 11:00 am 0
Location: Perth, WA

Post by Stevo »

AMD all the way
I have an AthlonXP 2600 that I have been using
for 2 years now and I have never had a problem
as has been said before More Bang For Your Buck

:D :D :D
The most important people in your life are taken away too soon and the arseholes never go a away.
User avatar
p-saurus
Baaaaa!
Baaaaa!
Posts: 1282
Joined: Wed Apr 24, 2002 8:56 pm 0
Yahoo Messenger: p_saurus
Location: Tucson, Arizona
Contact:

Post by p-saurus »

AMD for sure. I've never hesitated in reccomending them and I haven't met anybody who has had a problem with one since the KT-133 chipset. At this point, the old "stability issues" knock is just a myth. AMD is cheaper, faster and better at this point. IMO, buying from Intel is a waste of money.
User avatar
D.K. Tronics
Baaaa!
Baaaa!
Posts: 630
Joined: Fri Jan 03, 2003 2:06 am 0
Location: UK

Post by D.K. Tronics »

I've just recent upgraded from the AMD 2.5 Barton, which overclocked to a 3.2 on standard air cooling and no voltage changes. Ran that config with an NForce 2 400, for a year and never had any problems.

Just got an Athlon 64 2800+ C0 CG stepping (fab overclocker), + the MSI K8N Neo Platinum Nforce 3 250.
These 2 cost me £148 inc VAT, and boy what an upgrade.
The motherboard is fantastic, definately one of the best NF3 boards around. And the 2800+, which runs at 1800, I have got running at 2200, on standard air cooling.

The thing is with A64's, is that you can use cheap PC3200 RAM, and use tight timings but lower FSB settings, and STILL get as good as performance as the expensive Corsair PC4000 RAM. The A64's, have superb memory controllers, and rely less on memory bandwidth. So you can run RAM async to the FSB. Keep the AGP/PCI locked, and still get the performance.
I have mine on a 240 FSB, 166 mhz RAM 5/6 divider, which effectively gives you 195 mhz RAM with tight timings, and 1T command rate. And it's 100% stable.
Pisses all over the Intel machines, especially for gaming.

If you can afford it, I'd go for a socket 754 A64 2800 or 3000+, and a good Nforce 3 250 board like the MSI Neo, or the DFI Lanparty.
User avatar
hairy_pete
Baaaaaaa!
Baaaaaaa!
Posts: 7217
Joined: Mon May 27, 2002 8:10 pm 0
Location: A Tiny Village in Bavaria

Post by hairy_pete »

"you can run the RAM async to the FSB"

Don't apply old concepts to new architecture. There is no FSB in A64. The RAM frequency is divided down from CPU core clock.

The entry point for AMD64 architecture is the ECS 755-A2 board (dead cheap at 45 euros currently) plus an A2800+ (104 euros), and as much PC3200 (or slower) DDR RAM as you want.
User avatar
manicx
Baaaaa!
Baaaaa!
Posts: 1209
Joined: Tue Jan 14, 2003 10:50 am 0
Location: Greece
Contact:

Post by manicx »

P4, P4, P4!

I have a similar setup as a friend of mine par the CPU and Mobo chipset (P4 with i865 for me and AMD64 with something for him). He had problems with games I didn't, he failed to install SP2, and he faces several crashes. I had some crashes but that was to crap RAM. Since I replaced them, my PC is up and running constantly for about a month without a single crash.

Although I have a Prescott P4 (3.0E) my CPU temp during winter will go to 50 Celcius the higher in extreme gaming or video processing. My friend's AMD goes up to 58. We have the same box and same PSU set up to the same RPMs. We both use the standard fans (I intend to buy a new one though since I get nearly 58 Celcius on load during the Greek summer and the Intel cooler sounds like a helicopter).
User avatar
hairy_pete
Baaaaaaa!
Baaaaaaa!
Posts: 7217
Joined: Mon May 27, 2002 8:10 pm 0
Location: A Tiny Village in Bavaria

Post by hairy_pete »

Yet another "AMD is unstable" spinner.

If your system is unstable, you built it wrong, or you got a faulty or under-spec component. Your fault, or your supplier's. Not AMD's.

Mainboard's temperature readings are hardly ever accurate, and never comparable from one kind of board to the next. That's not a valid point either.
User avatar
Mr Dom
Baaaaa!
Baaaaa!
Posts: 1375
Joined: Fri Dec 03, 2004 3:03 pm 0
Location: Cardiff

Post by Mr Dom »

... & anything under 90C on the mainboard temp is fine - not going to affect the stability one bit.
- Dom
Play Games
<Haircuts are for wimps!>
User avatar
hairy_pete
Baaaaaaa!
Baaaaaaa!
Posts: 7217
Joined: Mon May 27, 2002 8:10 pm 0
Location: A Tiny Village in Bavaria

Post by hairy_pete »

Er, the CPU core temperature, not the mainboard's. If measured correctly, and if displayed without "user no-panic" correction factors.

Many current mainboards don't even display the temperature they actually measure. That's because with all that "high temperature=bad" spin (and, partly, from what they're used to from back in the days when we measured air temperature in the socket, not the actual silicon die temperature), people panic when they see 75C. So you simply go display less, support phone rings no more. Solved! :roll:
Post Reply