I bet it does it at 60hz thoughSir_LANs-a-lot wrote:Just crashes upon loading for me
WinXP PRO SP2
1Gb RAM
Athlon "Sempron" 1.6Ghz
GeForce 4 - 4600Ti 128Mb
Onboard Audio
*sniffle*
T2K and VLM emulator: updated 12/2/07 to version 0.06b
Hmmm. About 60/40 success/fail, which is slightly disappointing but oh well 
You chaps who are having undiagnosed crashes, can you grap DebugView and see what it says.
If it's crashing on opening the ROM, try naming it "Tempest 2000.jag" in the application directory. Then it should start on boot. If that fails, see above

I may be seeing a pattern here - is everyone with a 9xxx ATI card having no trouble? Or, more to the point, is everyone who is having trouble using nvidia cards? Not my fault you can't buy decent hardware you know
You chaps who are having undiagnosed crashes, can you grap DebugView and see what it says.
If it's crashing on opening the ROM, try naming it "Tempest 2000.jag" in the application directory. Then it should start on boot. If that fails, see above
Known issue. Doesn't get in the way. Not gonna get fixed soonEly wrote:Also the Menus over lay themselves rather than switch between each one.
Not quite. The timing loop is a horrible hack at the moment, but if sound is on it always runs the DSP enough timeslices by running continuously until the sound buffer is full. As a result, the lower the spec of the machine, the more time the DSP gets. And, of course, the DSP can't be throttled back below this minimum time. So what happens is that this 'one frame' takes several real frames. You've probably only got a few % horsepower left after the music's run - if you use DebugView you can see how much CPU time is going on each hardware unit.Snakey wrote:Is the sound done on a seperate thread or something? Just that on my system (admittedly, well below 'spec' at only 900mhz) the game seems to run at about the right speed, but the music slows down a lot, even with the throttle thing enabled.
Leveraging Starscream I got most of the blitter and GPU core fundamentally running on a flight to the US in April. T2K isn't too hard to emulate because it hits hard on the same bits of hardware over and over rather than using every tiny little part of the machine.Snakey wrote:Quite fancied a pop at jag emulation myself a while back.
Numeric pad - first press is bank, second press is effect. Here's the page Jeff gave me on advanced stuff.Snakey wrote:Some quick instructions on how to control the VLM would be nice. I couldn't seem to get it to do much apart from what it does by default.
Can you give me your DirectX version and system spec?Alarm wrote:Failed to blit to back buffer" error here...
I may be seeing a pattern here - is everyone with a 9xxx ATI card having no trouble? Or, more to the point, is everyone who is having trouble using nvidia cards? Not my fault you can't buy decent hardware you know
- PVB
- Sheepie Whore

- Posts: 32542
- Joined: Mon Apr 22, 2002 10:16 pm 0
- XBL Gamertag: PVBuk
- PSN: PVBuk
- Location: Medway, U.K.
Used DebugView, not sure how to configure it, but got a log file on crash anyway.
It doesn't say a lot, but here it is:
http://www.medwaypvb.pwp.blueyonder.co. ... LUFFY1.zip
It doesn't say a lot, but here it is:
http://www.medwaypvb.pwp.blueyonder.co. ... LUFFY1.zip
Press Z twice to enter fullscreen VLM mode,
then press O (option) to set the joypad to VLM controls (little VLM
logo appears bottom right of screen right way up). Then you can
choose between the effects by just pressing 2 digits (bank # and
effect #, there are 9 banks 1-9, so pressing 1 5 would get you effect
5 in bank 1, pressing 6 3 would get uou effect 3 in bank 6).
Some of the effects, particularly the feedback ones, are controllable
by the d-pad. Bank 9 is a "user performance" bank not driven by the
music, d-pad to move the effect origin, hold down x (middle button) to
generate effects, amd c to make a strobe flash!
Tis lovely to see the old thing again, bless
.
then press O (option) to set the joypad to VLM controls (little VLM
logo appears bottom right of screen right way up). Then you can
choose between the effects by just pressing 2 digits (bank # and
effect #, there are 9 banks 1-9, so pressing 1 5 would get you effect
5 in bank 1, pressing 6 3 would get uou effect 3 in bank 6).
Some of the effects, particularly the feedback ones, are controllable
by the d-pad. Bank 9 is a "user performance" bank not driven by the
music, d-pad to move the effect origin, hold down x (middle button) to
generate effects, amd c to make a strobe flash!
Tis lovely to see the old thing again, bless
Justified and Ancient.
I'd like to get D2K and AVP working as well but they're both stropping with bugs I can't see obvious reasons behind. I'm embarking on the tedious process of writing a directed tester for the RISC cores in the hope that will turn something up.Dave wrote:And it won't actually play, but Defender 2000 boots as well. You can get into the menu (crashes when you try to start a game). Playing menu music and everything.
I'd also like to fix the glitches with the shaded web on T2K.
Instantly crashes on my gaming PC.
Works fine on my music PC - sods law!
However I do also get what Geeza got when trying to run Tempest in fullscreen:
Works fine on my music PC - sods law!
However I do also get what Geeza got when trying to run Tempest in fullscreen:
Still - very impressive, with none of the audio glitching I always got in Project Tempest.Only initial issue was with full-screen which for me just gave a big window with a flickery title bar.
- Muttley
- Sheepie Whore

- Posts: 13169
- Joined: Thu Apr 25, 2002 12:30 pm 0
- XBL Gamertag: Mu77ley
- Location: In a maze of twisty passages, all alike.
- Contact:
Hi Dio,
Not tried it yet, but I will do this evening.
Once question, is it possible to use mouse input to control T2K? Just asking, as if it's possible I'll be able to stick it on my cab and play it using my replica Tempest spinner!!! *Spooge*
Muttley
Not tried it yet, but I will do this evening.
Once question, is it possible to use mouse input to control T2K? Just asking, as if it's possible I'll be able to stick it on my cab and play it using my replica Tempest spinner!!! *Spooge*
Muttley
Muttley's Blog: Rarely updated, occasionally interesting… maybe
RetroRemakes Framework: Open Source BlitzMax Game Framework
MuttMod: My Open Source BlitzMax Modules
RetroRemakes Framework: Open Source BlitzMax Game Framework
MuttMod: My Open Source BlitzMax Modules
- PVB
- Sheepie Whore

- Posts: 32542
- Joined: Mon Apr 22, 2002 10:16 pm 0
- XBL Gamertag: PVBuk
- PSN: PVBuk
- Location: Medway, U.K.
Geforce 6600GT = Nvidia.Dio wrote:Arse. That says everything's working up to the point at which it enters the emulation loop and therefore stops logging. nvidia card?PVB wrote:Used DebugView, not sure how to configure it, but got a log file on crash anyway.
Tick the 'use mouse as spinner' option, press pause on the menu, enable rotary controllerMuttley wrote:Once question, is it possible to use mouse input to control T2K? Just asking, as if it's possible I'll be able to stick it on my cab and play it using my replica Tempest spinner!!! *Spooge*
I'm not convinced by the feel myself - I'm open to suggestions on how if could be tuned better.


