I think im being hacked

Inane baanter or words of wisdom - you decide...
User avatar
oxo
Baaaa!
Baaaa!
Posts: 988
Joined: Fri Jul 28, 2006 11:03 pm 0
Location: Sunny Stockport

I think im being hacked

Post by oxo »

Morning
Something very wierd started happening on my PC last night.

I noticed ALOT of activity on my router of data being transfered
and could see the light on my drive flashing and it was whirring
even though I was doing nothing on the PC.

I activated Norton Firewall and it immediately detected an intrusion
but it completely locked out the network connection so I can't surf the
net check email etc, if I uninstall Norton I can use the net again
but the data transfer begins again immediately.

I have scanned with Spyware Doctor and PC Tools Antivirus and
they are both coming up with nothing.

I really am at my wits end as I can't seem to suss out what the hell
is going on. Also when I try Windows Firewall it says due to an
"unknown" error it is unable to start it.

Any advice appreciated before I do a complete drive format tonight,
which obviously I don't really want to do.

Am I being hacked??

Thanks
User avatar
benedictw
Baaaaaaa!
Baaaaaaa!
Posts: 6012
Joined: Thu Mar 25, 2004 3:44 pm 0
XBL Gamertag: CoderBen
Location: Poole, UK
Contact:

Post by benedictw »

Can you do CTRL-ALT-DEL, sort the processes by memory and post the list here? It sounds like you may have something seeding torrents or spyware on your machine. Thats Windows Firewall won't start is DAMM suspicious.
Gamertag\PSN: CoderBen
User avatar
Dio
Sheepie Whore
Sheepie Whore
Posts: 18887
Joined: Mon May 31, 2004 1:08 pm 0
Location: Newcastle UK

Post by Dio »

Go to http://www.sysinternals.com and get Process Explorer and TCPView.

Process Explorer will let you look at every process on your machine and see who wrote it, if it is signed, and google for the process name.

TCPView will show you every application on your system attempting to use the net. There's always lots there, but look for the unusual applications.

That said, if it's persistent spyware it will be really hard to get rid of if you don't know what you're doing. It usually takes me a couple of hours to clean up a machine that's got a particularly persistent attack on. You probably will need to reformat to get rid of it. However, it's good to get an idea of what it was, where it might have come from, and how you can stop it getting in again.
User avatar
oxo
Baaaa!
Baaaa!
Posts: 988
Joined: Fri Jul 28, 2006 11:03 pm 0
Location: Sunny Stockport

Post by oxo »

thanks for the advice. I did do a CTRLALTDEL and virtually shut
everything down yet it was still going.

I think a rebuild is the only way as the fact that Windows Firewall
won't start is concerning me.

God its soooo annoying!
User avatar
ekendrick
Baaaaaa!
Baaaaaa!
Posts: 3033
Joined: Wed Apr 24, 2002 12:14 pm 0
Location: Stratford-upon-Avon

Post by ekendrick »

Don't rebuild just yet.

Go into "Control Panel" | "Administrative tools" | "services" and make sure the "Windows Firewall / Internet Connection Sharing" service is started.

Install a new copy of AVG Anti-virus (or whatever anti-virus you have), and perform a scan of your computer. Run spy-bot search and destroy to get rid of unwanted apps - spy-bot S&D is totally paranoid, so likely to return lots of trivial/unimportant results. If it returns nothing at all the most likely cause is that you have software on your pc disabling spy-bot S&D. In which case you need to follow this guide :- Basic Spyware, Trojan And Virus Removal tutorial

Of course, if you have rebuilt your machine recently and/or very happy and comfortable doing so, go ahead. Just double-check to make sure you have a backup of everything you may need again, don't forget any passwords you may have asked firefox/ie to save and which you don't have a separate note of.
User avatar
zip accident
Sheepie Whore
Sheepie Whore
Posts: 13928
Joined: Sun Feb 20, 2005 1:58 pm 0
Location: Bristol, UK

Post by zip accident »

oxo wrote:

I activated Norton Firewall and it immediately detected an intrusion
but it completely locked out the network connection so I can't surf the
net check email etc, if I uninstall Norton I can use the net again
but the data transfer begins again immediately.
I use Zone Alarm. I use Norton AV, but I don't use their firewall. How configurable is Norton Firewall? Zone Alarm will let you permit access to the net program by program, which seems a useful option to me.

I don't know a lot about viruses, and Zone Alarm definitely tends to nag, but it does seem to mostly do the job.

You might want to try it, unless anyone here knows better, in which case I need to know what the problem is.

I do get a lot of disk activity, but that seems to be Windows Defender, and there is no apparent net activity connected with it.
"My way is the way of not fighting":- the book of Enter the Dragon.
User avatar
littledrummerboy
Baaaaaa!
Baaaaaa!
Posts: 2187
Joined: Fri Nov 05, 2004 10:30 am 0
Location: Dubai, UAE

Post by littledrummerboy »

Is it passworded your router? Next door might have managed to get on to it!
User avatar
oxo
Baaaa!
Baaaa!
Posts: 988
Joined: Fri Jul 28, 2006 11:03 pm 0
Location: Sunny Stockport

Post by oxo »

thanks for more advice :)

The PC is definately the one using the router as when I pull out
the ethernet cable all activity stops.
pipclancy
Baa!
Baa!
Posts: 41
Joined: Mon Jul 21, 2003 12:33 am 0

Post by pipclancy »

when you first start up and machine has settled down

start / cmd

type "netstat -a" [return]

this will show you all connections,
look for anything suspicions, especially port 6667 or 25

you could dump this output via the commend netstat -a >c:\dump.txt

then paste contents of the file c:\dump.txt here for us to look at...
User avatar
piku
Sheepie Whore
Sheepie Whore
Posts: 20960
Joined: Wed Apr 24, 2002 10:44 am 0
Website: Http://Www.ncot.uk
Location: Wakefield
Contact:

Post by piku »

I'm assuming you have some sort of broadband connection and it has a router, sharing the connection with various things in your house...

Why isn't your router doing its job properly? Correctly configured networks remove the need for individual client machines to run firewall software at all.

Obviously your machine is infected with something nasty, and I'd isolate it from the network before your ISP notices and cuts your connection off. Once it's all cleaned, I'd look at how they managed to get past your router. That bit worries me more than your machine being invaded.

Unless you downloaded something by accident, but then your virus checker should have noticed.

Obviously fixing your computer is the first thing to do, but then I'd try and find out how it happened. After all, if there's an exploit that affects your setup, the instant you fix it they'll get back in and you'll be at this point again in a few hours.
return (0);
User avatar
Dio
Sheepie Whore
Sheepie Whore
Posts: 18887
Joined: Mon May 31, 2004 1:08 pm 0
Location: Newcastle UK

Post by Dio »

piku wrote:Correctly configured networks remove the need for individual client machines to run firewall software at all.
I utterly disagree. As soon as you make this choice, you've immediately abandoned all attempts at egress filtering, so if anything can get in, it has automatic rights to talk to the world and do what the hell it wants.

A good security policy employs defence in depth - especially in terms of adding stages that will give you notification of unusual things going on. Router NAT firewall, personal firewall with application tracking and connection rule notification, virus scanner is the minimum number of layers I would consider. And that still has substantial holes.
User avatar
oxo
Baaaa!
Baaaa!
Posts: 988
Joined: Fri Jul 28, 2006 11:03 pm 0
Location: Sunny Stockport

Post by oxo »

ok working on the PC now, im posting from my other one

Spybot found a nasty little fecker called Torpig.
It has now been removed so we will see.

Update shortly :wink:
User avatar
mattley
Baaaaaaa!
Baaaaaaa!
Posts: 6253
Joined: Thu Aug 01, 2002 3:50 pm 0
Location: Watford
Contact:

Post by mattley »

Dio wrote:
piku wrote:Correctly configured networks remove the need for individual client machines to run firewall software at all.
I utterly disagree. As soon as you make this choice, you've immediately abandoned all attempts at egress filtering, so if anything can get in, it has automatic rights to talk to the world and do what the hell it wants.
I utterly disagree :)

The key words in piku's post were 'correctly configured', to say that making that choice "immediately abandoned all attempts at egress filtering" is simply not the case. One is simply moving the responsibility from the client to the perimeter, quite correctly IMO, providing your perimeter equipment is up to the job.

I do conceed that you have a point regarding most default consumer stuff, but in principle I'm with piku on this one.
vi vi vi the text editor of the beast.
User avatar
Dio
Sheepie Whore
Sheepie Whore
Posts: 18887
Joined: Mon May 31, 2004 1:08 pm 0
Location: Newcastle UK

Post by Dio »

Most?

Show me a perimeter firewall under £100 that even an above average consumer can configure to block port 80 connections to arbitrary servers, say, the one that "TROJANZ.EXE" on an internal PC is using to contact its control server.

That's a fucking tough problem for a business firewall supported by top quality sysadmin to solve. It's just not going to happen in the consumer space.

Let's not even think about the fact that it makes every PC on the internal network subject to the whims of its least expert user, which is enough of a flaw on corporate networks, let alone a house with three teenagers in it.
User avatar
oxo
Baaaa!
Baaaa!
Posts: 988
Joined: Fri Jul 28, 2006 11:03 pm 0
Location: Sunny Stockport

Post by oxo »

bah ive given up with it! Deleted the Trojan but it was still streaming
data so feck it.

I have a fresh install of XP on a back up drive incase of emergencies
and im just about to ghost it back.

Im so fuckin frustrated!
Post Reply