Windows Server 2008
Windows Server 2008
Anyone else playing with this? I have 2008 Datacenter Edition RC0 running in VMWare (as a 32-bit Vista OS).
I haven't dived into many of its features yet. Attempted to join a box to a 2003 AD domain, but had some issues updating the schema with adprep /forestprep. The tool worked, but 2008 said that it didn't.
What's interesting is that Windows 2008 forest-mode offers NOTHING advantageous, except preventing 2003 boxen from acting as DC's in the forest. Win 2008 domain-mode gives a few niceties, like better encryption for Kerberos, and now allows you to define more than one password policy per domain (finally). That means OU-assigned password policies, and likely user-specific ones too if you're mad-good with applying GPO's.
Lots of everything else looks a lot like Vista does, minus Aero. IPv6 support is apparent everywhere. Also, the non-GUI install looks pretty sweet, though I haven't tried it yet.
I haven't dived into many of its features yet. Attempted to join a box to a 2003 AD domain, but had some issues updating the schema with adprep /forestprep. The tool worked, but 2008 said that it didn't.
What's interesting is that Windows 2008 forest-mode offers NOTHING advantageous, except preventing 2003 boxen from acting as DC's in the forest. Win 2008 domain-mode gives a few niceties, like better encryption for Kerberos, and now allows you to define more than one password policy per domain (finally). That means OU-assigned password policies, and likely user-specific ones too if you're mad-good with applying GPO's.
Lots of everything else looks a lot like Vista does, minus Aero. IPv6 support is apparent everywhere. Also, the non-GUI install looks pretty sweet, though I haven't tried it yet.
Oh, the standard RDC/TS client won't work with it?Wibble wrote:I've only been playing with the Termina Server side of it all, but so far I'm quite happy with it. If only they'd distribute the client
Probably touch more of 2k8 once my schedule clears up.
-w
I just tested the Mac-based RDC Client (provided by MS) and it doesn't work for Remote Desktop. RD is set on low-security mode. It gives a "network error" message. The newer one on 2003 works fine though.
I seem to remember downloading a new version of RDC from windows update, optional settings some months back. maybe thats worth a go.Dave wrote:Oh, the standard RDC/TS client won't work with it?Wibble wrote:I've only been playing with the Termina Server side of it all, but so far I'm quite happy with it. If only they'd distribute the client
Probably touch more of 2k8 once my schedule clears up.
-w
I just tested the Mac-based RDC Client (provided by MS) and it doesn't work for Remote Desktop. RD is set on low-security mode. It gives a "network error" message. The newer one on 2003 works fine though.
01000101 01000100 01000111 01000101
http://www.redbubble.com/people/fotofill/ buy my photos!
- Wibble
- Baaaaaa!

- Posts: 3317
- Joined: Fri May 02, 2003 10:13 pm 0
- XBL Gamertag: misterwibble
- Location: The Hague - The Netherlands
- Contact:
It won't work with tunneling rdp over https (which is the whole point of setting up a TS gateway for meDave wrote:Oh, the standard RDC/TS client won't work with it?Wibble wrote:I've only been playing with the Termina Server side of it all, but so far I'm quite happy with it. If only they'd distribute the client
Probably touch more of 2k8 once my schedule clears up.
-w
I just tested the Mac-based RDC Client (provided by MS) and it doesn't work for Remote Desktop. RD is set on low-security mode. It gives a "network error" message. The newer one on 2003 works fine though.
-W
- Sir_LANs-a-lot
- Sheepie Whore

- Posts: 12143
- Joined: Mon Mar 10, 2003 1:00 am 0
- Location: Here
- FatherDougal
- Posts: 24
- Joined: Wed Apr 11, 2007 9:31 am 0
Re: Windows Server 2008
Just one slight correction - unfortunately, password settings objects can't be assigned to OUsDave wrote: and now allows you to define more than one password policy per domain (finally). That means OU-assigned password policies, and likely user-specific ones too if you're mad-good with applying GPO's.
This is kind of what I work on, so thanks for the comments, and let me know if you have any questions....!
Re: Windows Server 2008
Oh cool, MS coder!FatherDougal wrote:Just one slight correction - unfortunately, password settings objects can't be assigned to OUsThey apply to users or groups, so you'd have to create a group that mirrored the OU user membership. Not ideal, but the marketing people put a positive spin on it
This is kind of what I work on, so thanks for the comments, and let me know if you have any questions....!
Edit - Found a copy of the help text here:
http://technet2.microsoft.com/windowsse ... x?mfr=true
That doesn't sound like much of an issue. A little annoying, but much better than having to deploy a second domain for another password policy (or, living with one domain, not doing it right).
It couldn't be too hard to write a script that dumped OU User membership into a Group, now would it?
- Kelloggs
- Baaaaa!

- Posts: 1859
- Joined: Wed Jun 22, 2005 11:38 pm 0
- XBL Gamertag: TheAntiKelloggs
- Location: Widnes or Altrincham. Take your pick.
Re: Windows Server 2008
Can I just check on that one? Is the word "forest" in there significant, or does that mean that a Win 2003 Server can't interoperate as a domain controller within a Win2008 domain? Can you add a Win2008 DC onto a Win2003 domain (presumably downlevel compatibility)?Dave wrote:preventing 2003 boxen from acting as DC's in the forest
Anyone else, I'd think, "Nah, that's bollocks.". With Microsoft, it's as wise to check...
Re: Windows Server 2008
If you run your Forest Function Level in "Windows 2008 Mode," all domain controllers in all domains within the forest must be running Windows 2008 (or higher, eventually). Windows 2000/2003 member servers can continue to exist, just not as domain controllers.Kelloggs wrote:Can I just check on that one?Dave wrote:preventing 2003 boxen from acting as DC's in the forest
If you run your Domain Function Level in "Windows 2008 Mode," all domain controllers within that specific domain must be running Windows 2008 or higher. Windows 2000/2003 member servers can continue to exist. And, other domains within the same forest can continue to have 2000/2003 domain controllers (assuming their running in either 2003 Native, or 2000 Native domain function level modes).
A prerequisite to upgrading your forest to 2008 mode, is that all domains within the forest must be upgraded to 2008 mode first, as well. I'm assuming that as that's how it works with Windows Server 2003.
Yes, "Forest" is significant. A Forest Root Domain is created when you create the first domain in active directory.Kelloggs wrote:Is the word "forest" in there significant, or does that mean that a Win 2003 Server can't interoperate as a domain controller within a Win2008 domain?
All domains within the same Forest automatically trust each other, using transitive trusts. They also share the same Schema, among other things.
Yes. You need to update your AD Schema first (using adprep /forestprep, which needs to be run on a DC within the old domain/forest, using the version of adprep that came on the Win 2008 DVD, by a Schema Admin or Enterprise Admin, which has access to the Schema Master DC).Kelloggs wrote:Can you add a Win2008 DC onto a Win2003 domain (presumably downlevel compatibility)?
Windows 2008 can exist as a DC within an environment running Windows 2000 DC's, Windows 2003 DC's, or Windows 2008 DC's. Win 2008 can exist within the following Domain Function Levels:
Windows 2000 Native (2000, 2003, 2008 DC's only)
Windows 2003 (2003, 2008 DC's only)
Windows 2008 (2008 DC's only)
It's also worthy to note that Windows 2000 Native seems to be the oldest "legacy" domain mode supported. Windows 2003 Interim, and Windows 2000 Mixed are gone, which means no more Windows NT 4 DC's anymore (nor, any SAMBA-based DC's).
- Kelloggs
- Baaaaa!

- Posts: 1859
- Joined: Wed Jun 22, 2005 11:38 pm 0
- XBL Gamertag: TheAntiKelloggs
- Location: Widnes or Altrincham. Take your pick.
So, pretty much what they've been doing every Server vesion upgrade since whenever. Ta for that; it was as I feared. No Win2008 domain anywhere near me for while, then; I've just got a new 2003 one installed and tamed. Not planning on breaking it just yet, especially if there's no great advantage to doing so...
Yeah, basically as they've done before. You can still have Win 2008 DC's added into the mix. Financially, it probably only makes sense to migrate everything from 2003 to 2008 if you have a dying need for some of the extras they're putting into it, or if you have software assurance on your old licenses.
I'm not sure how CAL's are handled (do they sell software assurance with those too, even though it's not software?). You tend to have to upgrade those between OS's, so I'm making an assumption here.
I'm not sure how CAL's are handled (do they sell software assurance with those too, even though it's not software?). You tend to have to upgrade those between OS's, so I'm making an assumption here.
Toms Hardware has an overview up of RC0:
http://www.tomshardware.com/2007/10/25/ ... _reviewed/
It covers some of the new features. Good general overview, but nothing covering nitty-gritty details or anything like that.
http://www.tomshardware.com/2007/10/25/ ... _reviewed/
It covers some of the new features. Good general overview, but nothing covering nitty-gritty details or anything like that.


