Fondly remembered old computer hardware

Inane baanter or words of wisdom - you decide...
Post Reply
User avatar
tufty
Sheepie Whore
Sheepie Whore
Posts: 12524
Joined: Fri Jan 07, 2005 4:52 pm 0
Location: French Alps

Re: Fondly remembered old computer hardware

Post by tufty »

JQW wrote:Looks like the main board from a Tangerine Microtan 65, the precursor for the Oric 1.
It is. I got mine second hand, with a few other bits and pieces (backplane, hex keypad, but no case and no tanex board). It never worked fully, I think the guy that put it together may have fucked up.

Simon
"massive retard™", "full of shit™", "tiny bitch™", "retarted™", "a bit of a one trick pony™", "petty™", "simple minded idealistic twat™", "miserable humourless fucker™"
User avatar
Portland
Baaaaaaa!
Baaaaaaa!
Posts: 8828
Joined: Thu Apr 06, 2006 8:16 am 0
Location: Swinton, South Yorkshire

Re: Fondly remembered old computer hardware

Post by Portland »

Image


Fondly remembered in the loosest sense. My dad got this "for the office" despite broad hints of a Sinclair nature 8O

If anyone is unfamiliar you had to load any purogramming language from tape each session or work in shite mc.

Nothing really ever got published for it, but I wrote a few shit games taking advantage of the embedded "graphics" resident in ROM (think the sort of tackle that lived on the edge of VIC 20 keys.
Portland 3.0.1.0 public release rolled out
User avatar
Portland
Baaaaaaa!
Baaaaaaa!
Posts: 8828
Joined: Thu Apr 06, 2006 8:16 am 0
Location: Swinton, South Yorkshire

Re: Fondly remembered old computer hardware

Post by Portland »

I blame Big Ron for the shirt sponsorship.

Blingy fucker :wink:
Portland 3.0.1.0 public release rolled out
User avatar
tufty
Sheepie Whore
Sheepie Whore
Posts: 12524
Joined: Fri Jan 07, 2005 4:52 pm 0
Location: French Alps

Re: Fondly remembered old computer hardware

Post by tufty »

sack wrote:
Baggypants wrote: Image
and people moaned about the noise a loading spectrum made? I can still hear it screeching away even now
I can't. I printed quite a lot with mine, and am therefore now utterly deaf.

Oh, I had a teleprinter, too, picked it up for nothing and made up an interface board to use it on my VIC20. Bastarding noisy thing it was, one of the rubber feet had rotted away, so the protruding screw slowly drilled through the desk due to the vibration when in action.

Simon
"massive retard™", "full of shit™", "tiny bitch™", "retarted™", "a bit of a one trick pony™", "petty™", "simple minded idealistic twat™", "miserable humourless fucker™"
User avatar
guythp
Baaaaaaa!
Baaaaaaa!
Posts: 5659
Joined: Thu Apr 25, 2002 11:49 pm 0
Location: Ipswich, Suffolk

Re: Fondly remembered old computer hardware

Post by guythp »

piku wrote:I had an Acorn Electron :)

Like a BBC, but not as good.
No, but then it was half the price. I've always preferred the look the the 'leccy over the BBC. But then that's probably just proud owner syndrom.

The oric does still look rather nice, doesn't it?.. Very clean and in-the-future-kitchen/spaceship-control-station looking.
the hairy pies
User avatar
Orava
Sheepie Whore
Sheepie Whore
Posts: 12698
Joined: Sat Mar 13, 2004 12:13 am 0
Location: The West Country

Re: Fondly remembered old computer hardware

Post by Orava »

Image

Many a demo was written with this (and some games cracked. er hem. Properly of course, not with the silly freeze thing).

and

Image

also had this, with HUGE 800kb storage.

Image
Holier than thou
User avatar
piku
Sheepie Whore
Sheepie Whore
Posts: 20960
Joined: Wed Apr 24, 2002 10:44 am 0
Website: Http://Www.ncot.uk
Location: Wakefield
Contact:

Re: Fondly remembered old computer hardware

Post by piku »

tufty wrote: I can't. I printed quite a lot with mine, and am therefore now utterly deaf.
One of the computer rooms at uni (the crap room full of 286s and early Pentiums - the room where computers get put to die... and are thus abused by final year students doing their projects) had a 386 Netware printserver hooked up to two dot matrix printers - both set to print in high-speed draft mode with a big box of fanfold paper under each one.

When both were going the table swayed from side-to-side and banged against the wall :)

Many times I came in and found a printer merrily scraping away at its platen, the paper having jammed long ago and now neatly crammed into parts of the printer the manufacturer never intended paper to go.

Printers haven't come on much since, we have a laser at work that will eat an entire sheet of paper and turn it into a 1cm wide concertina. Removing it requires opening all the flaps on the printer, taking out the toner cart, lifting some retaining wheels and making all printer engineers cry by pulling really hard on the corner of the paper just visible beneath a really sharp metal edge.
return (0);
User avatar
Chuffmeister
Baaaaaa!
Baaaaaa!
Posts: 2186
Joined: Fri May 10, 2002 10:37 am 0
Location: The Shire.

Re: Fondly remembered old computer hardware

Post by Chuffmeister »

Image


Image
https://soundcloud.com/audioguy - Always some new sounds there

Time Flies like a rotten alarm clock.
User avatar
stealthbanana
Baaaaaa!
Baaaaaa!
Posts: 2805
Joined: Wed Nov 09, 2005 11:59 pm 0
Location: Over Here.

Re: Fondly remembered old computer hardware

Post by stealthbanana »

Image

Well I had one and loved it, still got it in the loft as well.
Not long now before lollipop men are called Darren
User avatar
Ragnorak
Baaaa!
Baaaa!
Posts: 671
Joined: Sat Apr 27, 2002 10:11 am 0
XBL Gamertag: DGThx113
Yahoo Messenger: RAGS828
Location: Walsall

Re: Fondly remembered old computer hardware

Post by Ragnorak »

me and my brother had one of these one christmas and we loved it - can't remember what happened to it ???

http://retrogamescatalog.com/acatalog/info_3796.html
You may think it's a long way to the corner shop, but that's just peanuts to space...
User avatar
Firefox
Sheepie Whore
Sheepie Whore
Posts: 11412
Joined: Fri Apr 26, 2002 6:15 pm 0
Location: Sheffield

Re: Fondly remembered old computer hardware

Post by Firefox »

Ragnorak wrote:me and my brother had one of these one christmas and we loved it - can't remember what happened to it ???

http://retrogamescatalog.com/acatalog/info_3796.html
I miss that style of box art. 8)

(Apart from the photo of two numpties sitting in front of an old telly, obviously. :))
"I am a very considerate person. If I want to go out all night on my miniature golf course and shoot lizards, well, no reason to keep the neighbours awake..."
User avatar
OX
Baaa!
Baaa!
Posts: 402
Joined: Sun Aug 12, 2007 4:37 pm 0

Re: Fondly remembered old computer hardware

Post by OX »

Firefox wrote:
Ragnorak wrote:me and my brother had one of these one christmas and we loved it - can't remember what happened to it ???

http://retrogamescatalog.com/acatalog/info_3796.html
I miss that style of box art. 8)

(Apart from the photo of two numpties sitting in front of an old telly, obviously. :))
Ha Ha, the old "Let's all smile for the promotional family around the TV shot" which was most likely followed by comments like "How the fuck do we get it to work!" :)
Just show me the fucking delete option!
User avatar
Yak
Sheepie Whore
Sheepie Whore
Posts: 20266
Joined: Wed Apr 17, 2002 10:22 am 0
Location: Wales
Contact:

Re: Fondly remembered old computer hardware

Post by Yak »

Justified and Ancient.
User avatar
GBH
Baaa!
Baaa!
Posts: 477
Joined: Wed May 18, 2005 12:55 am 0

Re: Fondly remembered old computer hardware

Post by GBH »

You know, I look at a lot of these old computers and I can't help feeling that in some instances we've gone backwards as far as design is concerned. When you consider the size of the average desktop PC (ignoring laptops) you would think looking at the past, laptop size would be the norm and desktops would be niché but instead it's the other way around. I'm guessing it has a lot to do with the modular design necessitating the space to expand.

Brings back a lot of memories of Cardigan Electronics in their old shop (the one directly behind Woolies before they moved down the road) and standing there for hours playing on the Vic20's and the Electrons before nipping down the road to that business place who had a Dragon 32 which ran Monsters (on the flimsiest joystick you've ever seen which I broke and subsequently never went to the shop again!)

Fond memories indeed

G
User avatar
axel000
Baaaaaa!
Baaaaaa!
Posts: 2905
Joined: Thu Sep 29, 2005 4:02 am 0
PSN: huckwee
Location: Philadelphia, USA

Re: Fondly remembered old computer hardware

Post by axel000 »

Yak wrote:[quote="Chuffmeister
http://amigan.classicgaming.gamespy.com/[/quote]

:stunned: :angel:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Gamertags:
[Steam] scottish_usa
[PSN] huckwee
[Star Citizen] Zander9
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post Reply