Can anyone solder up my arcade stick for me?

Jollies, mini-jollies, RetroVisions, ski-ing and trips to the moon.
Post Reply
jasybee
Posts: 16
Joined: Sat May 10, 2008 1:27 pm 0

Can anyone solder up my arcade stick for me?

Post by jasybee »

Hi RV dudes!

I should be going to Markies 41st in Oct, but was wondering if there is anyone going that knows how to solder and if they wouldn't mind soldering up my arcade stick. I foolishly gave it to a mate to work on and it's come back worse and needing more repairs! :(

Don't ask me how but they have managed to break the connections on the pins from the 8 button board to the controller IC board. Usually the pins are soldered onto the controller board and then the button board has it's own connector which fits over the pins. He's managed to snap the pins off the board so now they just touch and need soldering. If anyone can bring an Iron and do this for me then there would be a beer or two in it for them? It would literally be a 5 minute job for someone that knows how to do this.

I would really appreciate it if anyone could help?

The arcade stick is like this one:

http://vpgames.com/p-1041-mayflash-ps2p ... games.aspx

Cheers,

Jaseybee.

(PS. Sorry if this thread is in the wrong place)
User avatar
piku
Sheepie Whore
Sheepie Whore
Posts: 20960
Joined: Wed Apr 24, 2002 10:44 am 0
Website: Http://Www.ncot.uk
Location: Wakefield
Contact:

Re: Can anyone solder up my arcade stick for me?

Post by piku »

can we see a photo of the damage? I'm probably going and can solder.
return (0);
jasybee
Posts: 16
Joined: Sat May 10, 2008 1:27 pm 0

Re: Can anyone solder up my arcade stick for me?

Post by jasybee »

Hi! Thanks for the offer of help. I will take a pic this evening and post it on here so you can see what I am getting at. I have since come across a few sites which show how to mod the stick using sanwa parts! :idea:

The problem with the stick is that the second pcb, which is the button bank has been separated from the controller board. Pins extend out and were soldered on but not anymores by the looks of it! 8O

The actual PCB and pads look fine though so maybe it might be an idea to replace the buttons and just solder wires from the buttons onto the controller PCB? That looks simple enough with a dremel for someone who knows what they are doing, to make the holes 30mm from 28mm so the sanwa buttons would fit. Fitting another joystick appears to involve making existing screw holes bigger as well.

It would be nice if this could be pimped up really! Take a look at these sites and see what you think? I have seen Piku's Mame cabinet making talents on Facebook, so I wouldn't envisage it would take him long to pimp up a joystick or two! :wink:

Here are the links with info on the modding:

http://translate.google.com/translate?j ... ry_state0=

http://www.ozhadou.net/forum/viewtopic.php?t=3276

Let me know if anyone fancies it. I don't mind paying someone a little something for their time and materials. I can provide the parts. Good old eBay! lol

Cheers!

J.
User avatar
renegade_si
Baaa!
Baaa!
Posts: 283
Joined: Tue Apr 03, 2007 7:58 pm 0
Location: Location Location. Kirsty & Phil 4eva.

Re: Can anyone solder up my arcade stick for me?

Post by renegade_si »

sorry dude, I aint got time to turn on my ps3 and lose at sf4 let alone learn to solder that intricavy...see you in Oct tho!
jasybee
Posts: 16
Joined: Sat May 10, 2008 1:27 pm 0

Re: Can anyone solder up my arcade stick for me?

Post by jasybee »

No worries Si!

I think I might buy the parts anyways and have a go at fitting them myself. I might be able to file the holes a little bit, instead of using a Dremel and fitting the stick doesn't look too bad. Just the soldering that scares me at the moment as I have not done any for years!

I think I might just get myself a small Iron and see if I can have a go at it. Just need to locate some old circuit boards to have a practice first! I will let you know how I get on!

As for SF IV, well, I have given up on that online since I got to G1 because it's just too stressful and even an accomplished player like me gets owned online once in a while! I just don't have the time to lock myself away and play it every minute of the day unlike all the other sad unskilled unemployable people around the world! The recession seems to have brought out a lot of online SF IV players! lol

I've decided it's a waste of time and effort so i'm focusing on developing my geeky-ness and fighting for real with my Kickboxing, as that's much more fun as you get to hit people in the real world! Besides, I have a real taste at the moment for beating up my sparring partner! lol

Yeh, see you in Oct!

J.
User avatar
OX mkII
Baaaaa!
Baaaaa!
Posts: 1548
Joined: Sun Jan 25, 2009 3:53 pm 0

Re: Can anyone solder up my arcade stick for me?

Post by OX mkII »

Exact same stick I upgraded with Sanwa parts using that very same guide - it's no 5 minute job but definitely worth replacing the crappy mayflash parts
Fuck the shareholders
jasybee
Posts: 16
Joined: Sat May 10, 2008 1:27 pm 0

Re: Can anyone solder up my arcade stick for me?

Post by jasybee »

Hi There!

I know what you mean about the crappy stock parts!

In the end, I decided to be brave and take the plunge and have a go at it myself and it worked out pretty well!

I had to re-learn how to solder after 10 years but it wasn't that hard as I did have a GNVQ in soldering a white back! lol

I am now looking on the best way to create some custom artwork to cover up the crappy top with some nice SF IV artwork! I was thinking of printing something on photo paper, then laminating it and cutting out the holes and curves with a sharp scalpel and then mounting the artwork by applying spray tack on the back?

I think that would work?

Here is a couple of pics of my newly modded Mayflash with Sanwa parts. I am changing the last 2 buttons on the end to White tho in true SF IV fashion! :)

Internal view - All nice and tidy! 8)

Image

External view - Looks sexy doesn't it? :lol:

Image

Wiggle Wigglely,

Jasey.

:skip:
User avatar
Dungeon-Dave
Baaaaaa!
Baaaaaa!
Posts: 3925
Joined: Thu Aug 04, 2005 12:01 pm 0
Location: UK
Contact:

Re: Can anyone solder up my arcade stick for me?

Post by Dungeon-Dave »

If it's a simple case of "that needs to be connected to that" soldering job, then I'll bring my iron along.

If it's figuring out a wiring diagram and choosing what needs to be connected to what (prior to the soldering) then I'm probably not your bod.

Since your original post suggests it's a 5-min job for pin reconnections, I reckon it's the former.

I take it you've some way of checking it all works once the job's done, right?
Post Reply