Cyclists

Inane baanter or words of wisdom - you decide...
Post Reply
User avatar
Jimaroid
Baaaaaaa!
Baaaaaaa!
Posts: 5146
Joined: Fri May 09, 2003 12:21 pm 0
Location: Dundee

Re: Cyclists

Post by Jimaroid »

Stop what you're doing and watch this.

http://imaginate.redbull.com

Danny Macaskill's new video. I nearly choked on an ice cream watching this. It's astonishing.

Edit: Oh! Meant to post this in the "Show us your bike(s)" thread. Search fail. :D
User avatar
(o)(o)
Baaaaaaa!
Baaaaaaa!
Posts: 6885
Joined: Tue Jan 19, 2010 2:21 am 0

Re: Cyclists

Post by (o)(o) »

Anyone got any thoguhts on slime or tubeless tyres ?

I'm getting a flat every other ride... :?
User avatar
venusian
Baaaaaaa!
Baaaaaaa!
Posts: 6655
Joined: Wed Nov 06, 2002 2:22 pm 0
Location: South Gloucestershire

Re: Cyclists

Post by venusian »

Schwalbe Marathon Plus
User avatar
Purple Grapefruit
Baaaaaa!
Baaaaaa!
Posts: 2427
Joined: Sun Jan 29, 2006 10:41 pm 0
Location: London UK..........Off at a tangent

Re: Cyclists

Post by Purple Grapefruit »

(o)(o) wrote: I'm getting a flat every other ride... :?
Have you checked the tyre/s to make sure that there is no embedded nasty sharp
things in there causing punctures?
User avatar
venusian
Baaaaaaa!
Baaaaaaa!
Posts: 6655
Joined: Wed Nov 06, 2002 2:22 pm 0
Location: South Gloucestershire

Re: Cyclists

Post by venusian »

Purple Grapefruit wrote:
(o)(o) wrote: I'm getting a flat every other ride... :?
Have you checked the tyre/s to make sure that there is no embedded nasty sharp
things in there causing punctures?
Also check for ingrowing spokes, damaged rim tape and burrs from tyre levers.
User avatar
(o)(o)
Baaaaaaa!
Baaaaaaa!
Posts: 6885
Joined: Tue Jan 19, 2010 2:21 am 0

Re: Cyclists

Post by (o)(o) »

Purple Grapefruit wrote:
(o)(o) wrote: I'm getting a flat every other ride... :?
Have you checked the tyre/s to make sure that there is no embedded nasty sharp
things in there causing punctures?
When I first patched the back tyre there was a thorn inside the innertube.. Image
venusian wrote:Also check for ingrowing spokes, damaged rim tape and burrs from tyre levers.
Will take a closer look.

Those Schwalbe don't come cheap.. worth it if no more punctures!
adam
Baaaaaa!
Baaaaaa!
Posts: 4418
Joined: Sat Jun 24, 2006 9:15 pm 0

Re: Cyclists

Post by adam »

you can get them from europe cheaper

http://www.bike-discount.de/shop/misear ... athon+plus
User avatar
(o)(o)
Baaaaaaa!
Baaaaaaa!
Posts: 6885
Joined: Tue Jan 19, 2010 2:21 am 0

Re: Cyclists

Post by (o)(o) »

User avatar
Portland
Baaaaaaa!
Baaaaaaa!
Posts: 8828
Joined: Thu Apr 06, 2006 8:16 am 0
Location: Swinton, South Yorkshire

Re: Cyclists

Post by Portland »

It's time - we're going to get back to cycling...

Used to be a regular pootler cycling to work and back, and living on the edge of the Peak District made for many a mile on country roads, tracks, trails and the odd bit of pukka offroad. Even went as far as getting spare wheels with narrow reverse treads on for road use and did a few 50 and 100 mile charity rides. Move of house and job made commute impractical (further and the need to cross some pretty savage roads, including one of two M1 junctions and also took us further from quick access leisure rides. At similar time car was replaced with one that couldn't take the cycle rack. In 2006, increasing back problems resulted in a 3 layer lumbar fusion and that was that, cycling officially over. I've had some knee issues too, with one operation and probably more to come to deal with what's best described as tiny tumours in my knee joint, but following physio after last op, my physiotherapist said if I didn't take the piss, a bit of cycling the following spring (ie now) could be an option.

Had a go towing Bo round Center Parcs in a hire cycle and trailer and that didn't kill me, so as we've got a bigger car now, we're going for it. Mel and I have acquired a trailer for the offspring and are getting MTBs with a view to odd bits of track, trail and various pleasant to ride around parks and the like. Won't be breaking arms and helmets having offs at 40mph coming down from Stanage edge (before it was surfaced, I should add) just hoping to pedal the progeny and take in the air and sights.

In short, it's going to be tough, as a 45 year old who's lost cardio fitness and any degree of muscle is going to suffer, but hope it can lead to some family fun and fitness benefits without fucking up my back or knees.

Was amazed at how much further your £ goes compared to 15-20 years ago. Disc brakes, alu frame and front shocks would have been a fortune back then, but seem to be entry level for "pukka" bikes (as opposed to Argos £80 machines racing to fall to bits.)


If an old twat like me can do it, give it a punt. Can get some cheap second hand or "last year's" kit, so have a shot. If you're going to commute, cycle to work scheme can save a few quid if your company does it (but look into the legalities, it's not quite as straightforward as some suggest.) Oh, and get a bash hat eh?
Portland 3.0.1.0 public release rolled out
User avatar
matt303
Baaaaaa!
Baaaaaa!
Posts: 4219
Joined: Wed May 01, 2002 3:37 pm 0
Yahoo Messenger: matt303uk
Location: Derbyshire

Re: Cyclists

Post by matt303 »

Portland wrote: In short, it's going to be tough, as a 45 year old who's lost cardio fitness and any degree of muscle is going to suffer, but hope it can lead to some family fun and fitness benefits without fucking up my back or knees.
I'm almost in the same boat, hitting the mid 40's, used to cycle loads and then got out of the routine and had a bout of illness so only been out on the bike a handful of times in the last couple of years. Started back on it this bank holiday with a couple of rides and boy is the first 20 mins or so hell before my body warms up, going to try and keep the routine going knowing that it won't take that long to get back into shape for longish Peak District rides in the summer.

Until then the local cycle network will do :)

Imageeaster-ride-2 by matt303uk, on Flickr
User avatar
guythp
Baaaaaaa!
Baaaaaaa!
Posts: 5659
Joined: Thu Apr 25, 2002 11:49 pm 0
Location: Ipswich, Suffolk

Re: Cyclists

Post by guythp »

I hope someone can settle a quick question for me; I cycle to work (when the boys are older I'd like to have family rides out to places, whilst avoiding the utter twunts in cars/vans/taxis on the road - I'll not rant anymore about that for now though!) so I'm a regular cyclist.

Anyway, I've always been of the understanding that the seat should be high enough so that whilst pedalling, your lowest leg is straight, and you have to tip-toe (preferably on one leg) when standing still. I've used mountain style bikes for well over ten years, but recently bought a new 'hybrid' style bike (or 'a bicycle') from halfords. It's nice (albeit harsh on the perineum over any bumps) but when I bought it, the guy setting it up asked e to sit on it to see if the seat was high enough. He asked me to stand (feet flat on the ground) and put my foot on one pedal (legs still bent at the lowest point) and said that it was a good height and I should be fine.

I struggle. I'm leaving it as it is for now as my legs clearly need to man-up but I would've though the whole idea of getting what is possibly one of the most efficient modes of transport would be to make it easy to travel. Should I adjust the seat higher or was the young lad at the chain store that weekend correct in his advice?
the hairy pies
User avatar
Geenius
Baaaaaa!
Baaaaaa!
Posts: 3263
Joined: Mon Jul 12, 2004 2:01 pm 0
Location: North Wales

Re: Cyclists

Post by Geenius »

The below is based on getting optimum power through the pedals:

Based on research that I did a couple of years back, the seat should be 102% of the height of your greater trochanter.

Slightly easier way is that when on the seat, put your heel on the flat underside of the pedal, with the crank arm at 6 o'clock and your leg should be fully straight. When you then put your toes onto the pedal there will now be a slight bend in the knee.
Is this going to take long, only my foot's gone to sleep and I'd like to catch it up.

360 Gamertag: xGEENIUSx
http://www.fitnessin3steps.co.uk
User avatar
venusian
Baaaaaaa!
Baaaaaaa!
Posts: 6655
Joined: Wed Nov 06, 2002 2:22 pm 0
Location: South Gloucestershire

Re: Cyclists

Post by venusian »

I've always had mine set up so there's a slight bend even at the lowest point. The coach at the velodrome said the same thing. The exception is my mountain bike where I have a bigger bend because otherwise I reaching the ground is hard.
User avatar
Portland
Baaaaaaa!
Baaaaaaa!
Posts: 8828
Joined: Thu Apr 06, 2006 8:16 am 0
Location: Swinton, South Yorkshire

Re: Cyclists

Post by Portland »

guythp wrote:I hope someone can settle a quick question for me; I cycle to work (when the boys are older I'd like to have family rides out to places, whilst avoiding the utter twunts in cars/vans/taxis on the road - I'll not rant anymore about that for now though!) so I'm a regular cyclist.

Anyway, I've always been of the understanding that the seat should be high enough so that whilst pedalling, your lowest leg is straight, and you have to tip-toe (preferably on one leg) when standing still. I've used mountain style bikes for well over ten years, but recently bought a new 'hybrid' style bike (or 'a bicycle') from halfords. It's nice (albeit harsh on the perineum over any bumps) but when I bought it, the guy setting it up asked e to sit on it to see if the seat was high enough. He asked me to stand (feet flat on the ground) and put my foot on one pedal (legs still bent at the lowest point) and said that it was a good height and I should be fine.

I struggle. I'm leaving it as it is for now as my legs clearly need to man-up but I would've though the whole idea of getting what is possibly one of the most efficient modes of transport would be to make it easy to travel. Should I adjust the seat higher or was the young lad at the chain store that weekend correct in his advice?

Seems the odd Halfords has people that know what they're doing, but they're the exception to the rule. Was in our local branch recently and the "tech" was struggling to attach stabilisers to a kiddie bike. Not sure I'd trust him to put new fluid in my brakes :lol:
Portland 3.0.1.0 public release rolled out
User avatar
Portland
Baaaaaaa!
Baaaaaaa!
Posts: 8828
Joined: Thu Apr 06, 2006 8:16 am 0
Location: Swinton, South Yorkshire

Re: Cyclists

Post by Portland »

Spot the difference:

Image


Image



Old Dawes needed a lot of bits, cartridge loose, rear mech kaput, steerer and flex stem iffy and although the frame is basically sound, the now old dropouts at the back meant getting new bits was disproportionately expensive - she's gone to a local bike recycling scheme for someone to get the old steed up and happening again (plus they're more likely to have salvageable bits.) Got a good few thousand miles out of her, and although she's been laid up for a while, will miss my 20+ year old behemoth (wasn't exactly the lightest even back in the day.)

Now need a few precious hours to have a play before the carrier arrives. Annoyingly won't have chance until mid next week now!
Portland 3.0.1.0 public release rolled out
Post Reply