The best headphones I have ever owned
- VNVObit
- Baaaaaa!

- Posts: 4072
- Joined: Sun Jan 01, 2006 10:03 pm 0
- XBL Gamertag: vnvobit
- PSN: VNV_Obit
- Location: London
Re: The best headphones I have ever owned
At the other end of the spectrum I ordered some monoprice 8320 http://lifehacker.com/5927570/the-monop ... d-under-10 as well as come Comply Foam Tips (which work with my other buds).
Interested to see what they sound like as suspect its actually the seal that makes all the difference with buds in the lower range (don't tend to spend too much on buds as lose them regularly or they fall apart).
Interested to see what they sound like as suspect its actually the seal that makes all the difference with buds in the lower range (don't tend to spend too much on buds as lose them regularly or they fall apart).
"England is funny, but sometimes she scares me"
Tony Wakeford
My avatar is the cover of Tower of Babel's first single
"Sky is not roof, Earth is not bottom, the world is not yours, you are the world's" from Brown by Grotus
Tony Wakeford
My avatar is the cover of Tower of Babel's first single
"Sky is not roof, Earth is not bottom, the world is not yours, you are the world's" from Brown by Grotus
Re: The best headphones I have ever owned
Wow, they're less than four and a half Earth quid! It'd be rude not to try some. 
I've been using Comply foam tips for some years now, and they're really excellent once you get used to the feel of them.
The price shot up to about a fiver a pair a few years ago, but I get several months' use out of each pair using them every day at work, so it's still not bad. Worth it to block out the din so I can concentrate.
I've been using Comply foam tips for some years now, and they're really excellent once you get used to the feel of them.
The price shot up to about a fiver a pair a few years ago, but I get several months' use out of each pair using them every day at work, so it's still not bad. Worth it to block out the din so I can concentrate.
"I am a very considerate person. If I want to go out all night on my miniature golf course and shoot lizards, well, no reason to keep the neighbours awake..."
- wanye
- Baaaaaa!

- Posts: 3047
- Joined: Tue Sep 07, 2004 12:46 pm 0
- PSN: wanye_m
- Location: nottingham
- Contact:
Re: The best headphones I have ever owned
just realised my last post on here was 3 years ago...
so i replaced my HD477's (they are now on my desk at work) for DJing, i got a set of pioneer HDJ2000

love them. got them for £100 less than retail from a dj friend who had a set that broke under warranty, so got them replaced with new ones... but in the 2 weeks it took to get them replaced, he needed some, so went and bought another set.
so i got a brand new (genuine) set for a lot less than they should have been
i also managed to get a spare set of 477's cheap off ebay last year... these are now sat in my backup DJ laptop bag.
I'm actually looking at getting another set of cans, as in around 6 months time we're moving offices, and i'll be relying on public transport every day. i've mostly been eyeing up the BOSE QC3 noise cancelling cans - a mate has the QC2's and i really like them - theres rumours that the bose outlet in orlando sometimes have refurbs for $199, so if i can get a cheap set, i might take the plunge when i visit in october - anyone got any thoughts/experience with them?
i never used to be a bose fan, but i bought one of their L1 PA systems last year, and absolutely love it!
so i replaced my HD477's (they are now on my desk at work) for DJing, i got a set of pioneer HDJ2000

love them. got them for £100 less than retail from a dj friend who had a set that broke under warranty, so got them replaced with new ones... but in the 2 weeks it took to get them replaced, he needed some, so went and bought another set.
so i got a brand new (genuine) set for a lot less than they should have been
i also managed to get a spare set of 477's cheap off ebay last year... these are now sat in my backup DJ laptop bag.
I'm actually looking at getting another set of cans, as in around 6 months time we're moving offices, and i'll be relying on public transport every day. i've mostly been eyeing up the BOSE QC3 noise cancelling cans - a mate has the QC2's and i really like them - theres rumours that the bose outlet in orlando sometimes have refurbs for $199, so if i can get a cheap set, i might take the plunge when i visit in october - anyone got any thoughts/experience with them?
i never used to be a bose fan, but i bought one of their L1 PA systems last year, and absolutely love it!
Re: The best headphones I have ever owned
Blimey, these are really good! Amazingly so, for the price!VNVObit wrote:At the other end of the spectrum I ordered some monoprice 8320 http://lifehacker.com/5927570/the-monop ... d-under-10 as well as come Comply Foam Tips (which work with my other buds).
I was just going to just have a quick go with them, but ended up spending an hour listening to a variety of my favourite tracks.
I don't have the audiophile hipster vocab to describe how they sound, but compared to my posh-ish Sennheiser in-ear buds it sounds more like listening to an outdoor performance rather than one in a sound booth. Not that they let background noise in, but it sounds like you're listening to the music in a bigger space somehow...
I listened to a couple of my favourite Autechre tracks amongst the others. Not everyone's cup of tea, but their music has lots of layers going at the same time - which makes it easy to spot crap 'phones/speakers. All layers were present and correct, and sounding pretty damn good.
They come with three sizes of tips in floppy rubber. I left the medium ones on and found them to be very comfortable. I'll offer up some of my Comply foam tips some time to see if they're likely to fit.
People should buy these! For the pocket money price, they're still really good value even if you only use them as an occasional emergency backup.
"I am a very considerate person. If I want to go out all night on my miniature golf course and shoot lizards, well, no reason to keep the neighbours awake..."
Re: The best headphones I have ever owned
I did put some Comply memory foam tips on the Monoprice 8320s in the end. It felt a bit strange putting a fiver's worth of tips on £4.44's worth of phones, but what the hell...
Wow! *Fucking wow!* That takes the sound up to a whole new level again!
As well as sounding amazing, they're also really, really comfy. The tips expand to grip the inside of your ear canals as usual, and the body of the phones sit nicely inside the "well" of your ear - completely fill it up, in my case.
The only slight problem is getting them out again. You can't get your fingers in to grip the body of the phones to pull them out!
After a bit of experimentation I found that gripping the case next to the cable gland (which is at the top of your ear on these) and levering it gently downwards works best.
These are my favourite way to get tunes into my head now. Massively better than anything else I've ever used.
Wow! *Fucking wow!* That takes the sound up to a whole new level again!
As well as sounding amazing, they're also really, really comfy. The tips expand to grip the inside of your ear canals as usual, and the body of the phones sit nicely inside the "well" of your ear - completely fill it up, in my case.
The only slight problem is getting them out again. You can't get your fingers in to grip the body of the phones to pull them out!
After a bit of experimentation I found that gripping the case next to the cable gland (which is at the top of your ear on these) and levering it gently downwards works best.
These are my favourite way to get tunes into my head now. Massively better than anything else I've ever used.
"I am a very considerate person. If I want to go out all night on my miniature golf course and shoot lizards, well, no reason to keep the neighbours awake..."
- wanye
- Baaaaaa!

- Posts: 3047
- Joined: Tue Sep 07, 2004 12:46 pm 0
- PSN: wanye_m
- Location: nottingham
- Contact:
Re: The best headphones I have ever owned
i just ordered a set of the monoprice buds for going out with - i dont like taking my shure buds out to the pub with me in case i get drunk and lose them. they arrive tomorrow, so will see how i get on!
Re: The best headphones I have ever owned
I use the B&O A8 for mobile listening... Absolutely love them..
However the wire they use is far too flimsy and I now have an intermittent connection at the plug - for the third time. B&O repaired them the previous two times, but I'm thinking it might be better to put a meatier plug / strain relief on them. Not being an engineer, I don't know if this is even possible - the wires are so tiny! I have however done bits of pieces of soldering over the years (the washing machine I repaired last year is still running thanks to encouragement from YakYak folks
)
So my question is twofold
#1. Can it be done? This is the article :

#2. What would be a recommend plug.
I presume it would be insane to attempt to rewire them at the driver end. Incidentally I do highly recommend these headphones for those who prefer earbuds over the in-ear variety. I spent about 15 years going through different sets of earbuds before I came across these. They have a lovely shimmery, detailed mid range, and no roll off high frequencies.
However the wire they use is far too flimsy and I now have an intermittent connection at the plug - for the third time. B&O repaired them the previous two times, but I'm thinking it might be better to put a meatier plug / strain relief on them. Not being an engineer, I don't know if this is even possible - the wires are so tiny! I have however done bits of pieces of soldering over the years (the washing machine I repaired last year is still running thanks to encouragement from YakYak folks
So my question is twofold
#1. Can it be done? This is the article :

#2. What would be a recommend plug.
I presume it would be insane to attempt to rewire them at the driver end. Incidentally I do highly recommend these headphones for those who prefer earbuds over the in-ear variety. I spent about 15 years going through different sets of earbuds before I came across these. They have a lovely shimmery, detailed mid range, and no roll off high frequencies.
Trippy vibes...
http://soundcloud.com/two-gapper
http://soundcloud.com/two-gapper
- wanye
- Baaaaaa!

- Posts: 3047
- Joined: Tue Sep 07, 2004 12:46 pm 0
- PSN: wanye_m
- Location: nottingham
- Contact:
Re: The best headphones I have ever owned
so youve got a new plug on there at the moment that works ok?
what about reinforcing the sleeve/connection bit with some sugru?
what about reinforcing the sleeve/connection bit with some sugru?
- Deckard
- Sheepie Whore

- Posts: 10747
- Joined: Fri Jun 18, 2004 11:27 pm 0
- Location: Falmouth, Cornwall, UK
Re: The best headphones I have ever owned
My IE800 have bedded in nicely with my Fiio X5 now and they are just amazing. Thought they were a bit trebly to start with now but now after several weeks of use they have bedded in and seem to have a huge soundstage.
On a separate note this little insight into Grado published this week was very interesting -
http://www.adafruit.com/blog/2014/07/23 ... wednesday/
On a separate note this little insight into Grado published this week was very interesting -
http://www.adafruit.com/blog/2014/07/23 ... wednesday/
Now with a new Mac Mini Pro so dont judge me !
Re: The best headphones I have ever owned
Hi - No, they are broken at the mo.wanye wrote:so youve got a new plug on there at the moment that works ok?
what about reinforcing the sleeve/connection bit with some sugru?
That stuff could be useful post-fix.
Trippy vibes...
http://soundcloud.com/two-gapper
http://soundcloud.com/two-gapper
- VNVObit
- Baaaaaa!

- Posts: 4072
- Joined: Sun Jan 01, 2006 10:03 pm 0
- XBL Gamertag: vnvobit
- PSN: VNV_Obit
- Location: London
Re: The best headphones I have ever owned
that's happened me so often that I'm glad I found the monoprice ones. Truly excellent sound for the money with a significant reduction in background noise(o)(o) wrote:Hi - No, they are broken at the mo.wanye wrote:so youve got a new plug on there at the moment that works ok?
what about reinforcing the sleeve/connection bit with some sugru?
That stuff could be useful post-fix.
"England is funny, but sometimes she scares me"
Tony Wakeford
My avatar is the cover of Tower of Babel's first single
"Sky is not roof, Earth is not bottom, the world is not yours, you are the world's" from Brown by Grotus
Tony Wakeford
My avatar is the cover of Tower of Babel's first single
"Sky is not roof, Earth is not bottom, the world is not yours, you are the world's" from Brown by Grotus
Re: The best headphones I have ever owned
I normally get some of that heat shrink tubing/sleeve stuff used in electronics, put that half over the cable and plug and use a hairdryer or similar to shrink it down nice and tight. Couple of layers for extra strength if it is a flimsy cable.
Re: The best headphones I have ever owned
So can a wire so stupidly thin be soldered to a plug ok.
Steady hands and a magnifier enough?
Steady hands and a magnifier enough?
Trippy vibes...
http://soundcloud.com/two-gapper
http://soundcloud.com/two-gapper
Re: The best headphones I have ever owned
Get some Grados. Those come with ridiculously fat cables.
- Deckard
- Sheepie Whore

- Posts: 10747
- Joined: Fri Jun 18, 2004 11:27 pm 0
- Location: Falmouth, Cornwall, UK
Re: The best headphones I have ever owned
Bump - Wanty wanty

http://www.head-fi.org/t/751094/head-fi ... t_11229855
http://www.head-fi.org/t/751094/head-fi ... t_11229855
What's the big deal you ask? To start, the eFit process is easier to learn than the traditional silicone process. Also, the eFit system seems to be safer than silicone impressions. Though it has only happened to me once in many silicone impression sessions, one never forgets when the silicone goes too far--the pain can be excruciating (and my ear was sore for more than a day after my eardrum met the silicone). With the eFit system, there are some key safety measures in place. First, the inside camera also serves as a video otoscope, so the operator can see if she's approaching something (like your eardrum). There's also a depth gauge, marked for safety. Finally, the shape of the scanner's body is specifically designed to keep it from going too deep.
With its ease of use--and the inherent safety of the system--virtually any employee can be trained to properly use the eFit system in about an hour. For silicone impressions, I'll only go to those with extensive experience--like qualified audiologists--to have my ears shot full with silicone. With the eFit system, I'd be perfectly comfortable with a part-time hourly retail employee scanning my ears.
Also, for the many custom IEMs I've had made in the last ten years, I've had many sets of silicone impressions made, at an average cost of about $50 per impression pair. Silicone impressions have a lifespan of around two years (I think due to shrinkage), and once you send them away, you don't typically get them back, which is why I have had so many impressions made. With the eFit system, the same set of impressions will be able to be shared digitally with several custom IEM manufacturers, over time.
Now with a new Mac Mini Pro so dont judge me !


