Maplin XM20W regulated PSU as Sinclair PSU alternative?

The Joy of Tech - Anything and everything about all things shiny..
Post Reply
User avatar
oktup
Baaaaa!
Baaaaa!
Posts: 1027
Joined: Tue Jan 21, 2003 1:44 am 0
Location: Cumbria
Contact:

Maplin XM20W regulated PSU as Sinclair PSU alternative?

Post by oktup »

I have one of these I picked up from Oxfam ages ago and it occurs to me that it would make a nice replacement 48K Spectrum PSU. Is there any reason it wouldn't be a good idea?

Image

Output 13.8V (tested 13.8V unloaded)
2A continuous
3A 50% duty cycle
5A surge

The Sinclair power supply is marked 9V output -ve centre but is unregulated and outputs around 14V unloaded.
User avatar
skab
Baaaaaa!
Baaaaaa!
Posts: 3448
Joined: Sat Apr 27, 2002 1:53 am 0
Location: Barnyard, Ruhr area, Germany

Re: Maplin XM20W regulated PSU as Sinclair PSU alternative?

Post by skab »

oktup wrote:I have one of these I picked up from Oxfam ages ago and it occurs to me that it would make a nice replacement 48K Spectrum PSU. Is there any reason it wouldn't be a good idea?

Image

Output 13.8V (tested 13.8V unloaded)
2A continuous
3A 50% duty cycle
5A surge

The Sinclair power supply is marked 9V output -ve centre but is unregulated and outputs around 14V unloaded.
Well, the voltage seems to be way off, doesn't it?

It might work, since the Speccy has (IIRC) a voltage regulator on board, but again, this would be running way out of spec and probably cause the regulator to overheat if it doesn't blow up immediately. That the original PSU delivers 14V when not under load means nothing, that's the nature of the beast. The PSU you got there would happily deliver those 14V when under load and probably fry your Speccy.

So in short: Don't think so.

This thing is fine to power car related stuff, 13.8V is bang on with the voltage in a running car.

Better get a good switching power supply with the proper voltage if you want to power old gear.
User avatar
oktup
Baaaaa!
Baaaaa!
Posts: 1027
Joined: Tue Jan 21, 2003 1:44 am 0
Location: Cumbria
Contact:

Re: Maplin XM20W regulated PSU as Sinclair PSU alternative?

Post by oktup »

Cheers skab. I'll not try using it. :oops:
User avatar
toxibunny
Baaaaaaa!
Baaaaaaa!
Posts: 5906
Joined: Thu Jun 17, 2004 11:59 pm 0
Location: limb clock land

Re: Maplin XM20W regulated PSU as Sinclair PSU alternative?

Post by toxibunny »

use it for electro etching!
I made a deviantart page.
'....The baron is a gay old rogue with an eye for the ladies....'
Post Reply