MiSTer FPGA - FPGA Arcade and Console Emulation

The Joy of Tech - Anything and everything about all things shiny..
Post Reply
User avatar
Whiteball
Baaaaa!
Baaaaa!
Posts: 1811
Joined: Sat Nov 24, 2007 12:39 pm 0
Location: At the computer

Re: MiSTer FPGA - FPGA Arcade and Console Emulation

Post by Whiteball »

I have a feeling this thread is going to cost me money :lol:

Sounds excellent so far. Keep us updated whenever you get around to trying some of the computer cores.
The ghost of raids past
Baaaaa!
Baaaaa!
Posts: 1682
Joined: Sat Dec 03, 2005 7:38 pm 0

Re: MiSTer FPGA - FPGA Arcade and Console Emulation

Post by The ghost of raids past »

Can you list the parts you got

I see the Dev board at Digi Key but then I lose track of which of the various add on boards is needed

Thanks
User avatar
WiteWulf
Sheepie Whore
Sheepie Whore
Posts: 10125
Joined: Mon Aug 23, 2004 11:20 am 0
PSN: WiteWulf
Location: Loughborough(ish)

Re: MiSTer FPGA - FPGA Arcade and Console Emulation

Post by WiteWulf »

rowan wrote:Sounds fab! Now you have one for real, may I lazily pick your brains a bit?

My cab has:
* Arcade CRT with a D-SUB 15 connector
* Hardware buttons/sticks that go through a J-PAC which has a PS/2 keyboard plug
* Hardware spinner [tempest] that goes through a I-PAC which turns it into USB single axis of mouse

From the picture at the beginning, I think the CRT is covered and probably the spinner can go in 1 of the USB just fine.
What about my controls? Would I need a PS/2->USB adapter?


Okay, I'm far from an expert yet, but...

- you'll need an analogue I/O add-on card to get the VGA output (the DE10-nano board only has HDMI), but this will also give you 3.5mm analogue and TOSlink mini audio out ( https://misterfpga.co.uk/product/mister ... -with-fan/ )
- I think you'll need to replace the J-PAC heritage adapter with a newer USB version
- the I-PAC should "just work" as it's already USB

Also worth noting that there's a very neat board that presents the whole MiSTer rig as a JAMMA card for compatible cabinets:
:::G:::

PSN: WiteWulf
Switch: SW-3941-2878-7584
Steam: WITEWULF66
User avatar
WiteWulf
Sheepie Whore
Sheepie Whore
Posts: 10125
Joined: Mon Aug 23, 2004 11:20 am 0
PSN: WiteWulf
Location: Loughborough(ish)

Re: MiSTer FPGA - FPGA Arcade and Console Emulation

Post by WiteWulf »

The ghost of raids past wrote:Can you list the parts you got

I see the Dev board at Digi Key but then I lose track of which of the various add on boards is needed
NB. items in bold are stuff you need, anything else is just to make life easier or add functionality.

I bought:
- DE10-nano (Digikey's your best bet, Mouser sell them in the UK but are back-ordered to the end of March)
- 128Mb memory expansion (not compulsory, the board and most cores will operate without it, but some cores run better with it and some of the largest NeoGeo ROMs require it) https://misterfpga.co.uk/product/mister ... mb-module/
- a basic heat sink, fan and case (https://misterfpga.co.uk/product/mister ... -heatsink/)
- 8Bitdo 2.4GHz M30 controller, the 2.4GHz variant (as opposed to bluetooth) suffers less from interference from other bluetooth devices and has lower lag

Stuff I already had:
- compatible PSU, the DE10-nano comes with a two-pin US PSU but I didn't have a plug adapter. I chopped the barrel plug off the provided PSU and soldered it onto a UK PSU that output 5V/2A, tip +ve
- OTG USB hub, needs to be OTG as the DE10-nano only has a single micro USB connector. You may want a powered one if you're connecting more than a single bluetooth/wifi/other radio dongle
or
- USB hub add-on board, this is arguably a neater way of adding additional USB ports, and will fit into one of the many cases available, but is more expensive than a simple OTG hub ( https://misterfpga.co.uk/product/usb-hu ... ster-fpga/ )
- USB keyboard, before you have a controller connected you have to be able to press F12 to get into the configuration screen
- USB wifi adapter, the DE10-nano has wired ethernet onboard, but you may find wifi more convenient
- 32GB SD card, the DE10-nano comes with an 8GB SD card, but you're not gonna fit many games on that
- USB bluetooth dongle, let's me connect my...
- 8Bitdo SN30 controller
- bluetooth keyboard, for configuring MiSTer and using with computer cores
- bluetooth mouse, can be used as a spinner or with computer cores


MiSTer is actually linux running on an ARM board, that loads the necessary code into the FPGA that run the emulations. As such, any USB add-ons you intend to connect will need to be linux compatible (and have the drivers compiled into the kernel). The first wifi adapter I tried, whilst having linux drivers, didn't have them in the MiSTer kernel. It's easy to search online in the MiSTer forums to find out if stuff you already have is compatible, though, or by stuff from MiSTer sellers that they know is compatible.

With respect to the local storage, I stopped using that eventually and figured out how to store my ROMs on a share on my NAS and connect to that over the LAN from the MiSTer, but more on that later. That's a whole separate post's worth :lol:
:::G:::

PSN: WiteWulf
Switch: SW-3941-2878-7584
Steam: WITEWULF66
NorthWay
Baaaa!
Baaaa!
Posts: 806
Joined: Sat Apr 27, 2002 7:45 pm 0
Location: Grimstad, Norway

Re: MiSTer FPGA - FPGA Arcade and Console Emulation

Post by NorthWay »

WiteWulf wrote: Also worth noting that there's a very neat board that presents the whole MiSTer rig as a JAMMA card for compatible cabinets:
Want. One. Now.
(Anyone know where you can get a replacement for a burnt-in 14(?)" CRT in an el-cheapo standup cab?)
User avatar
merman
Sheepie Whore
Sheepie Whore
Posts: 10943
Joined: Wed Feb 16, 2005 1:44 pm 0
XBL Gamertag: merman1974
Yahoo Messenger: andrewrfisher
Location: Skegness, England
Contact:

Re: MiSTer FPGA - FPGA Arcade and Console Emulation

Post by merman »

Oh man, JAMMA adapter increases my need for one...
Twitter, Xbox, Wii U and Steam - merman1974
ZZAP is back - https://www.patreon.com/zzapmagazine
User avatar
WiteWulf
Sheepie Whore
Sheepie Whore
Posts: 10125
Joined: Mon Aug 23, 2004 11:20 am 0
PSN: WiteWulf
Location: Loughborough(ish)

Re: MiSTer FPGA - FPGA Arcade and Console Emulation

Post by WiteWulf »

Good progress being made on the CPS2 core and a significant improvement for CPS1:
https://www.retrorgb.com/jotegos-cps2-b ... ments.html

...and a new Atari Lynx core:


I loved the Lynx for two reasons: STUN Runner and Road Blasters, two of my favourite arcade machines that never got decent home conversions beyond the Lynx, imho
:::G:::

PSN: WiteWulf
Switch: SW-3941-2878-7584
Steam: WITEWULF66
User avatar
WiteWulf
Sheepie Whore
Sheepie Whore
Posts: 10125
Joined: Mon Aug 23, 2004 11:20 am 0
PSN: WiteWulf
Location: Loughborough(ish)

Re: MiSTer FPGA - FPGA Arcade and Console Emulation

Post by WiteWulf »

Also, spent yesterday afternoon trying to get some Amiga action out of the MiSTer with mixed results. Games wise things went pretty well, I had some good fun with Xenon II and Gods. I then decided to try my luck with some demos. Jesus On E's loads and gets about halfway through before guruing, State of The Art gurus every time it boots, and Big Time Sensuality gurus after the "loading please wait" screen comes up.

I think I may need to experiment with different kickstart ROM and CPU/ram configurations. This was all with '020, AGA, 1MB chip, 2MB fast and kickstart 3.1 ROM (so basically an A1200).

I got Workbench to load and, well, it's Workbench, nothing surprising there. Next I want to have a go at configuring a Picasa96 card and running it in 4k .
:::G:::

PSN: WiteWulf
Switch: SW-3941-2878-7584
Steam: WITEWULF66
User avatar
WiteWulf
Sheepie Whore
Sheepie Whore
Posts: 10125
Joined: Mon Aug 23, 2004 11:20 am 0
PSN: WiteWulf
Location: Loughborough(ish)

Re: MiSTer FPGA - FPGA Arcade and Console Emulation

Post by WiteWulf »

NorthWay wrote: Want. One. Now.
I know, right? :twisted:
(Anyone know where you can get a replacement for a burnt-in 14(?)" CRT in an el-cheapo standup cab?)
I get that people love the CRT look, but the video filters in MiSTer are superb, emulating horizontal and vertical scan lines where appropriate and blur/softening. There's even a whole load of filters specific to different console hardware (the SNES and GBA ones are excellent).

Life's too short. Stick a flat panel in it.
:::G:::

PSN: WiteWulf
Switch: SW-3941-2878-7584
Steam: WITEWULF66
The ghost of raids past
Baaaaa!
Baaaaa!
Posts: 1682
Joined: Sat Dec 03, 2005 7:38 pm 0

Re: MiSTer FPGA - FPGA Arcade and Console Emulation

Post by The ghost of raids past »

WiteWulf wrote:Also, spent yesterday afternoon trying to get some Amiga action out of the MiSTer with mixed results. Games wise things went pretty well, I had some good fun with Xenon II and Gods. I then decided to try my luck with some demos. Jesus On E's loads and gets about halfway through before guruing, State of The Art gurus every time it boots, and Big Time Sensuality gurus after the "loading please wait" screen comes up.

I think I may need to experiment with different kickstart ROM and CPU/ram configurations. This was all with '020, AGA, 1MB chip, 2MB fast and kickstart 3.1 ROM (so basically an A1200).

I got Workbench to load and, well, it's Workbench, nothing surprising there. Next I want to have a go at configuring a Picasa96 card and running it in 4k .

I downloaded a huge Multi Gig WHDload package that was listed in an Amiga Youtube setup guide for Mister. It has a set of demos most seem to work on the default Amiga 1200. I do remember though that when I had my original Amiga there were many demos that wouldnt run on a 2.0 Kickstart and would only work on a 1.3 kickstart. Some were picky about the memory available. A '20 bases amgia would probably be even worse espeically as the 1200 was kickstart 3.0.

link to the archive https://www.youtube.com/watch?v=VhUsCgTI0o0

I saw there was a partial Mister core for Bubble Bobble. If that ever gets finished I will not be able to resist !
User avatar
Deckard
Sheepie Whore
Sheepie Whore
Posts: 10748
Joined: Fri Jun 18, 2004 11:27 pm 0
Location: Falmouth, Cornwall, UK

Re: MiSTer FPGA - FPGA Arcade and Console Emulation

Post by Deckard »

Always had a soft spot for Lynx Robotron as it had all the original sound FX.
Now with a new Mac Mini Pro so dont judge me !
User avatar
WiteWulf
Sheepie Whore
Sheepie Whore
Posts: 10125
Joined: Mon Aug 23, 2004 11:20 am 0
PSN: WiteWulf
Location: Loughborough(ish)

Re: MiSTer FPGA - FPGA Arcade and Console Emulation

Post by WiteWulf »

I've not gotten around to trying the Robotron arcade core yet. Too scared, if I'm honest, that is one rock hard game :lol:

Which reminds me....I really need to give the Rygar arcade core a go
:::G:::

PSN: WiteWulf
Switch: SW-3941-2878-7584
Steam: WITEWULF66
User avatar
WiteWulf
Sheepie Whore
Sheepie Whore
Posts: 10125
Joined: Mon Aug 23, 2004 11:20 am 0
PSN: WiteWulf
Location: Loughborough(ish)

Re: MiSTer FPGA - FPGA Arcade and Console Emulation

Post by WiteWulf »

The ghost of raids past wrote: I downloaded a huge Multi Gig WHDload package that was listed in an Amiga Youtube setup guide for Mister. It has a set of demos most seem to work on the default Amiga 1200. I do remember though that when I had my original Amiga there were many demos that wouldnt run on a 2.0 Kickstart and would only work on a 1.3 kickstart. Some were picky about the memory available. A '20 bases amgia would probably be even worse espeically as the 1200 was kickstart 3.0.

link to the archive https://www.youtube.com/watch?v=VhUsCgTI0o0

I saw there was a partial Mister core for Bubble Bobble. If that ever gets finished I will not be able to resist !
Thanks for that link. It's a good twenty years since I last owned an actual Amiga so my memory is hazy on some of that. Shit, it was the 90s, my memory of that whole decade is hazy :lol:

I've grabbed those packages and will have a go at running some different configs later. I didn't realise KS3.1 came out after the A1200, so that's probably not helping, but Big Time Sensuality was one of the first AGA only demos I remember, so it should definitely run on the A1200 in some configuration.

A mate of mine back in the day had an '060 accelerator card for his A1200, and I remember seeing some amazing stuff running on that, but the MiSTer and Minimig folks have said they have no intention of going beyond '020 CPU wise. Which, by extension, means no MMU or FPU, so I'll not be running Amiga NetBSD on it.
:::G:::

PSN: WiteWulf
Switch: SW-3941-2878-7584
Steam: WITEWULF66
User avatar
WiteWulf
Sheepie Whore
Sheepie Whore
Posts: 10125
Joined: Mon Aug 23, 2004 11:20 am 0
PSN: WiteWulf
Location: Loughborough(ish)

Re: MiSTer FPGA - FPGA Arcade and Console Emulation

Post by WiteWulf »

Okaaaaay, wound the Minimig settings back to 68k, 512k RAM, ECS and Kickstart 3.0 and Jesus On E's is working nicely.

With '020 (d-cache enabled), AGA, 2MB chip and KS3.0 Big Time Sensuality runs but the any interlace graphics are badly distorted. Not sure how to fix that, I'm sure some digging on the Minimig forums will turn up a deinterlacer screen filter.

Turning disk turbo mode off seems to be a prerequisite for a lot of stuff. I guess they disk read for timings in some stuff.
:::G:::

PSN: WiteWulf
Switch: SW-3941-2878-7584
Steam: WITEWULF66
The ghost of raids past
Baaaaa!
Baaaaa!
Posts: 1682
Joined: Sat Dec 03, 2005 7:38 pm 0

Re: MiSTer FPGA - FPGA Arcade and Console Emulation

Post by The ghost of raids past »

The demos did all sorts of wierd stuff so it takes a great emulator not to collapse under them.

I remember Mental Hangover crashing on my Amiga, never did find out why. Years later I finally got to see it via Win uae.

Commercial games were the same Deuteros only worked for me on a 1mb 1.3 Amiga. Made me glad I fitted a kickstart switcher on the old 1500. I got the old beast out of the loft the other week, Sadly I didnt realise it had a battery when I stored it so it had decided to explode on the Motherboard.

Even after cleaning the MB with IPA and reseating all the chips it remained dead. Power supply was pushing the correct voltages but the Floppy never made any noises and nothing on the screen.
Post Reply