MiSTer FPGA - FPGA Arcade and Console Emulation

The Joy of Tech - Anything and everything about all things shiny..
Post Reply
User avatar
WiteWulf
Sheepie Whore
Sheepie Whore
Posts: 10125
Joined: Mon Aug 23, 2004 11:20 am 0
PSN: WiteWulf
Location: Loughborough(ish)

Re: MiSTer FPGA - FPGA Arcade and Console Emulation

Post by WiteWulf »

The ghost of raids past wrote: I saw there was a partial Mister core for Bubble Bobble. If that ever gets finished I will not be able to resist !
https://github.com/jotego/jtbubl

It's done, I was playing it this afternoon. It's spot on 8)

.
:::G:::

PSN: WiteWulf
Switch: SW-3941-2878-7584
Steam: WITEWULF66
User avatar
rowan
Baaaaaaa!
Baaaaaaa!
Posts: 7965
Joined: Tue Nov 25, 2003 11:53 pm 0
Location: Notts.

Re: MiSTer FPGA - FPGA Arcade and Console Emulation

Post by rowan »

My first Amiga was an A500 [not plus] which did have the Fat Agnus [ECS] and by and large, I would say that used to run all the pre-AGA kind of demoes. So you may want to dial that kickstart back to 1.3.
I had the built-in 512KB of chip RAM and after I got a 512KB fast RAM expansion, I had some hardware switch mod that let me switch it to be 1MB chip. I think this was generally OK with a number of things but just the 512KB chip RAM vanilla A500 I think has probably the best compatibility.

I think the A500+ was basically the same kind of machine but KS2.04 [the much-newer-looking workbench etc.] and that already started to bring in a number of game/demo incompatibilities.
The ghost of raids past
Baaaaa!
Baaaaa!
Posts: 1682
Joined: Sat Dec 03, 2005 7:38 pm 0

Re: MiSTer FPGA - FPGA Arcade and Console Emulation

Post by The ghost of raids past »

WiteWulf wrote:
The ghost of raids past wrote: I saw there was a partial Mister core for Bubble Bobble. If that ever gets finished I will not be able to resist !
https://github.com/jotego/jtbubl

It's done, I was playing it this afternoon. It's spot on 8)

.

Grrr I hate you. Now I will have to buy one !!
The ghost of raids past
Baaaaa!
Baaaaa!
Posts: 1682
Joined: Sat Dec 03, 2005 7:38 pm 0

Re: MiSTer FPGA - FPGA Arcade and Console Emulation

Post by The ghost of raids past »

Ok I just be dim. I went to that git hub page but can't seem to work out what's needed. I don't have the device yet it's somewhere in Kentucky flying to jolly old England. Last tracking said smoke me a kipper I will arrive by breakfast.

Could you explain what would be needed. I have the Mame roms for the game but seemingly no clue of what has to go where !
User avatar
Deckard
Sheepie Whore
Sheepie Whore
Posts: 10748
Joined: Fri Jun 18, 2004 11:27 pm 0
Location: Falmouth, Cornwall, UK

Re: MiSTer FPGA - FPGA Arcade and Console Emulation

Post by Deckard »

A glowing report for a competing machine although I appreciate its software rather than hardware emulation and so do they although this runs Saturn flawlessly apparently.

https://www.nintendolife.com/news/2021/ ... ro_machine

Tempted.

Especially as the reviewer himself said
This system runs every console I loved growing up and gives me the chance to have my entire collection legally in one place, all in crisp 1080p. I don't need to repeat myself as it's all in the review, but the Polymega team have smashed it with this machine. I love it to bits and can't recommend it highly enough. Given that I have little space these days to have all of my gaming machines set up, it's a godsend. There are minor issues to be addressed (as mentioned in the review) and, because it's software emulation, it's not going to be 1:1 (again, mentioned in the review), but I couldn't be happier with the state of the system as it stands now.
Now with a new Mac Mini Pro so dont judge me !
The ghost of raids past
Baaaaa!
Baaaaa!
Posts: 1682
Joined: Sat Dec 03, 2005 7:38 pm 0

Re: MiSTer FPGA - FPGA Arcade and Console Emulation

Post by The ghost of raids past »

It looks good but vastly more than a mister.
User avatar
WiteWulf
Sheepie Whore
Sheepie Whore
Posts: 10125
Joined: Mon Aug 23, 2004 11:20 am 0
PSN: WiteWulf
Location: Loughborough(ish)

Re: MiSTer FPGA - FPGA Arcade and Console Emulation

Post by WiteWulf »

Yeah, I chatted to Damien about the Polymega when he came around the other afternoon (he gave me his old MiSTer case that looks like an Amiga PSU 'cos he didn't like it, heathen :D ). From what he said, the Polymega is a much more slick presentation and has the huge advantage of being able to import your existing physical media. But there's no arcade emulation at all and it's more than twice what you'd pay for a basic MiSTer starter rig. And then you're adding on $80 a time for the "element modules", but that does come with a good controller.

As an aside, the PSX/PS1 core on the MiSTer is looking very good and the devs posted video of it running some test diss earlier in the week. Saturn is coming along nicely, too, and they've just pulled in a lone dev who was working on an Atari 7800 core to the project. CPS2 looks like it might drop this weekend, too.
:::G:::

PSN: WiteWulf
Switch: SW-3941-2878-7584
Steam: WITEWULF66
The ghost of raids past
Baaaaa!
Baaaaa!
Posts: 1682
Joined: Sat Dec 03, 2005 7:38 pm 0

Re: MiSTer FPGA - FPGA Arcade and Console Emulation

Post by The ghost of raids past »

Mine arrived in the UK and was marked for delivery today. I just checked tracking and it's at Tamworth which is hundreds of miles from me. After reading the earlier posts I guess that means it will be stuck there for a week or so :(
The ghost of raids past
Baaaaa!
Baaaaa!
Posts: 1682
Joined: Sat Dec 03, 2005 7:38 pm 0

Re: MiSTer FPGA - FPGA Arcade and Console Emulation

Post by The ghost of raids past »

The ghost of raids past wrote:Mine arrived in the UK and was marked for delivery today. I just checked tracking and it's at Tamworth which is hundreds of miles from me. After reading the earlier posts I guess that means it will be stuck there for a week or so :(
Knock on the door and ups delivered. digikey are good 2 days from the states. Now I have to wait for the memory modules from the UK supplier :)
User avatar
WiteWulf
Sheepie Whore
Sheepie Whore
Posts: 10125
Joined: Mon Aug 23, 2004 11:20 am 0
PSN: WiteWulf
Location: Loughborough(ish)

Re: MiSTer FPGA - FPGA Arcade and Console Emulation

Post by WiteWulf »

Nice work! UPS shipped mine from the US to UK in two days but it sat in a depot for a couple of weeks after that. If you bought your bits from misterfpga.co.uk it should arrive pretty soon, he's based a few miles away from here and ships really quickly.

Let me know if you have any problems or questions setting up, or pop onto the Discord, they're a friendly bunch and there's a specific "help" section:
https://discord.gg/YJbVUUSM
:::G:::

PSN: WiteWulf
Switch: SW-3941-2878-7584
Steam: WITEWULF66
The ghost of raids past
Baaaaa!
Baaaaa!
Posts: 1682
Joined: Sat Dec 03, 2005 7:38 pm 0

Re: MiSTer FPGA - FPGA Arcade and Console Emulation

Post by The ghost of raids past »

WiteWulf wrote:Nice work! UPS shipped mine from the US to UK in two days but it sat in a depot for a couple of weeks after that. If you bought your bits from misterfpga.co.uk it should arrive pretty soon, he's based a few miles away from here and ships really quickly.

Let me know if you have any problems or questions setting up, or pop onto the Discord, they're a friendly bunch and there's a specific "help" section:
https://discord.gg/YJbVUUSM
Thanks. I did indeed buy from misterfpga so I now await my dispatch notice.
The ghost of raids past
Baaaaa!
Baaaaa!
Posts: 1682
Joined: Sat Dec 03, 2005 7:38 pm 0

Re: MiSTer FPGA - FPGA Arcade and Console Emulation

Post by The ghost of raids past »

MisterFPGA shipped today. I can recommend his shop I placed two orders in 2 days and said he could combine the orders. He refunded me the excess postage. So I cant say more than how impressed I have been so far.
The ghost of raids past
Baaaaa!
Baaaaa!
Posts: 1682
Joined: Sat Dec 03, 2005 7:38 pm 0

Re: MiSTer FPGA - FPGA Arcade and Console Emulation

Post by The ghost of raids past »

In danger of making this a reply to me thread.

I got all my kit this morning and put it all together ran the upgrade scripts and eveything seems to work. Been playing Bubble Bobble for last couple of hours.
User avatar
WiteWulf
Sheepie Whore
Sheepie Whore
Posts: 10125
Joined: Mon Aug 23, 2004 11:20 am 0
PSN: WiteWulf
Location: Loughborough(ish)

Re: MiSTer FPGA - FPGA Arcade and Console Emulation

Post by WiteWulf »

Nice work
:mexican:

Don't worry...I know at least one other who's ordered the bits recently...so it won't be just us :x :lol:
:::G:::

PSN: WiteWulf
Switch: SW-3941-2878-7584
Steam: WITEWULF66
The ghost of raids past
Baaaaa!
Baaaaa!
Posts: 1682
Joined: Sat Dec 03, 2005 7:38 pm 0

Re: MiSTer FPGA - FPGA Arcade and Console Emulation

Post by The ghost of raids past »

Only issue I have is in Bubble Bobble (you may sense a theme here, Game has always been an obcession of mine) the display isnt on my TV screen. Its just too tall. I found the H and V adjust set them to max neg but its still off the top of the screen. Its not too much of an issue since this is just the score area.
Post Reply