LlamaZap - Falcon Video
- Gilby 4000
- Baa!

- Posts: 36
- Joined: Mon Apr 01, 2019 2:58 pm 0
Re: LlamaZap - Falcon Video
Ouch Kelloggs! I feel you... That's one of the main reasons emulation / preservation is important, as with ourselves our beloved kits are not getting any younger!
- Kelloggs
- Baaaaa!

- Posts: 1859
- Joined: Wed Jun 22, 2005 11:38 pm 0
- XBL Gamertag: TheAntiKelloggs
- Location: Widnes or Altrincham. Take your pick.
Re: LlamaZap - Falcon Video
Indeed we're not, but...



- Kelloggs
- Baaaaa!

- Posts: 1859
- Joined: Wed Jun 22, 2005 11:38 pm 0
- XBL Gamertag: TheAntiKelloggs
- Location: Widnes or Altrincham. Take your pick.
Re: LlamaZap - Falcon Video
I must say I'm feeling a little bit guilty having almost hijacked a thread, but this turns out to be the most apt one.
On the Falcon, I was missing a reset button, working sound, storage, a real-time clock, a keyboard cable with two ends (one being the keyboard), a working floppy disk drive, a VGA adaptor and a trustworthy power supply. Well, I've now got a 14MB memory upgrade (that's all, folks...) and a maths co-processor as well as a new reset button, an SSD, a non-working real-time clock replacement (I might have slightly buggered it... jury's still out, though), a connected keyboard, either a working FDD or a Gotek (as the mood takes me - but not both, thank you Atari), an adaptor for VGA that actually does R, G and B, and a Meanwell PSU. Missing from that second list was working sound. And, since it broke in 1996, it's remainded missing.
Today I found out why - the LM7809 regulator (taking 12V and outputting 9V to feed the two LM386 audio amp chips) was actually outputting 0.88V... and injecting an external 9V (voltage-controlled and current-limited) supply now means the bird is damn near fully back working again!
is approximately me at the moment. Yay!
(Oh, I also picked up a VGA-to-HDMI cable, so there's just a chance I can do an HDMI capture of Llamazap. See, I knew I'd get to the thread subject eventually - I never thought it would take 11 years, though!)
On the Falcon, I was missing a reset button, working sound, storage, a real-time clock, a keyboard cable with two ends (one being the keyboard), a working floppy disk drive, a VGA adaptor and a trustworthy power supply. Well, I've now got a 14MB memory upgrade (that's all, folks...) and a maths co-processor as well as a new reset button, an SSD, a non-working real-time clock replacement (I might have slightly buggered it... jury's still out, though), a connected keyboard, either a working FDD or a Gotek (as the mood takes me - but not both, thank you Atari), an adaptor for VGA that actually does R, G and B, and a Meanwell PSU. Missing from that second list was working sound. And, since it broke in 1996, it's remainded missing.
Today I found out why - the LM7809 regulator (taking 12V and outputting 9V to feed the two LM386 audio amp chips) was actually outputting 0.88V... and injecting an external 9V (voltage-controlled and current-limited) supply now means the bird is damn near fully back working again!
(Oh, I also picked up a VGA-to-HDMI cable, so there's just a chance I can do an HDMI capture of Llamazap. See, I knew I'd get to the thread subject eventually - I never thought it would take 11 years, though!)
- Gilby 4000
- Baa!

- Posts: 36
- Joined: Mon Apr 01, 2019 2:58 pm 0
Re: LlamaZap - Falcon Video
Llamazap is now fully playable on the Hatari emulator, they have implemented full JagPad / Power Pad support.
If you're interested check out the latest development version available from:
https://hatari.tuxfamily.org/download.html

If you're interested check out the latest development version available from:
https://hatari.tuxfamily.org/download.html

