Intel vs AMD

Inane baanter or words of wisdom - you decide...
User avatar
hairy_pete
Baaaaaaa!
Baaaaaaa!
Posts: 7217
Joined: Mon May 27, 2002 8:10 pm 0
Location: A Tiny Village in Bavaria

Post by hairy_pete »

Dio wrote:But the fact is while I've no arguments that my problems were down to application bugs, they only occurred with AMD systems with SP2. It is not AMD's fault, and I don't expect it to persist, but it's still a problem that I've experienced.
That's because you've been using a piece of fishy software*, unveiled by AMD's processors via a feature that Intel's have been lacking. See above.

*involuntarily, thanks to rigorous testing at MS ...
User avatar
D.K. Tronics
Baaaa!
Baaaa!
Posts: 630
Joined: Fri Jan 03, 2003 2:06 am 0
Location: UK

Post by D.K. Tronics »

hairy_pete,
sorry, but you really are coming across a bit arrogant, don't you think ?
Again, your picture of this new world is wrong.
No it's not wrong. My view is just different from yours, and more like everyone else in the normal world.
There is no Front Side Bus - CPU and Northbridge are one chip.
The FSB is built into the chip on a 754, that doesn't mean I don't have full control over it regardless of how it's described in my BIOS.
Clock generation starts with a base frequency (what that silly BIOS sells you as "FSB"). HTT frequency is multiplied UP from there, so is CPU frequency - independent from each other. RAM bus frequency is divided DOWN from CPU frequency.

So for example, with an Athlon 3000+ and PC2700 RAM on socket-754, you got 200 MHz base frequeny, HTT on x4, CPU on x9, RAM on /11. When Cool&Quiet steps the CPU down to 800 MHz, it does so by changing the CPU multiplier to x4 and the RAM divider to /5.

If this had PC3200 RAM, then base clock input and RAM clock output would happen to be the same frequency - but the latter is not derived from the further, as was the case in northbridge-centric architectures.

Similarly to the temperature issues I mentioned above, all that BIOS mess is to present the users with terms they've heard of and "protect" them from having to comprehend new stuff. Your post is a fine demonstration of how this actually has the opposite effect.
Thanks for patronising post, hp.
I'm fully aware of what and how it works.
The thing is, 99% of users don't use "I suddenly think I'm an AMD A64 engineer" jargon, and tend to use things like FSB, RAM dividers, etc...
Something, I was just trying to point out, rather than coming off as a prick.

You will also see that 99% of what you posted means jack when you are in your BIOS tweaking your PC. Whereas, what I posted relates to today's motherboard's and the BIOS. And NOT to how the A64 really works.
User avatar
hairy_pete
Baaaaaaa!
Baaaaaaa!
Posts: 7217
Joined: Mon May 27, 2002 8:10 pm 0
Location: A Tiny Village in Bavaria

Post by hairy_pete »

I am patronizing? Am I explaining things deliberately wrong "because the audience doesn't understand how it really works anyway", or are you? How about using the right terms and explanations? I did nothing but that. And if you care to admit it, Occam's razor applies here too - my explanation is not only correct, but also a lot simpler and easier to understand.

I see what got you upset - you gave incorrect descriptions that sound good to the unsuspecting, got caught because there happens to be experts around, and now you are trying to wiggle out of it, rather than simply admit that I'm right. Prick.

Consult publicly available diagnosis software like CPU-Z to see yours do what I said it does. Everyone can do that.

http://www.cpuid.com/cpuz.php
User avatar
gilesgoat
Sheepie Whore
Sheepie Whore
Posts: 27259
Joined: Wed Sep 03, 2003 7:54 am 0
Location: Monfalcone, Italy
Contact:

Post by gilesgoat »

To Hairy Pete:

BTW in the end I bought an AMD Sempron 2800+ that,
as stated in a TINY writing on the top left of the box says :
"AMD Sempron, with 256KB Cache, operates at 2000Mhz"

Seems to work fine, can't complain with it now, I still have to put a
different card in that mobo anyway to see how full performances are.

Pity they don't say really much about characteristics in the leaflet
included, they could say a bit more.
Giles the billy goat
"Baa"
User avatar
hairy_pete
Baaaaaaa!
Baaaaaaa!
Posts: 7217
Joined: Mon May 27, 2002 8:10 pm 0
Location: A Tiny Village in Bavaria

Post by hairy_pete »

That's just another case of deliberately un-educating the consumer. We've discussed that already ;)

You got a Thoroughbred-B or Thorton core, 166 MHz FSB, 2000 MHz core, 256 KBytes L2 cache. (The closest Athlon-XP would be rated 2400+, 133 MHz FSB, everything else the same.)
User avatar
rowan
Baaaaaaa!
Baaaaaaa!
Posts: 7965
Joined: Tue Nov 25, 2003 11:53 pm 0
Location: Notts.

Post by rowan »

D.K. Tronics wrote:hairy_pete,
sorry, but you really are coming across a bit arrogant, don't you think ?
I find his posts informative, I've yet to see him wrong on any of this stuff and I've yet to find a better informed person. Frankly I'm amazed he has the patience to keep posting.

Disclaimer: Not intended to be taken as having a go at anyone or taking sides etc. etc.
User avatar
Kemper_Boyd
Sheepie Whore
Sheepie Whore
Posts: 11967
Joined: Wed Jul 31, 2002 9:15 pm 0

Post by Kemper_Boyd »

The FSB on an Opteron and other K8 chips is internal,
it's the bus connecting to the System Request Queue
which in turn connects to the the Crossbar which
then connects to the Hypertransport links and the
Memory Controller.

The buses you guys are talking about are the I/O
bus (HT) and the memory bus. ;)
User avatar
D.K. Tronics
Baaaa!
Baaaa!
Posts: 630
Joined: Fri Jan 03, 2003 2:06 am 0
Location: UK

Post by D.K. Tronics »

Pete,
Go FUCK yourself.
Prick.
User avatar
hairy_pete
Baaaaaaa!
Baaaaaaa!
Posts: 7217
Joined: Mon May 27, 2002 8:10 pm 0
Location: A Tiny Village in Bavaria

Post by hairy_pete »

:lol:
User avatar
Salty
Baaaaaa!
Baaaaaa!
Posts: 2082
Joined: Wed Mar 03, 2004 8:29 pm 0
XBL Gamertag: salty69
Location: Middlesbrough
Contact:

Post by Salty »

I've been reading this thread with a big grin on my face. :D

I've not been entertained so much in ages. :D

I use Intel PCs at work and AMD based PCs at home. I only buy quality components so I've not had any problems with either type of system.

Going back to the original question though, whatever you can afford using the newest technology. Ignore any people who say there are 'driver issues' and get yourself a 64 bit based CPU (whichever) with a matching motherboard and RAM. Just buy a good quality one.

My personal preference is Giga-Byte ((mainboards) but many these days are just as good) and Crucial (RAM). But like I said, the best you can afford.
User avatar
teamonkey
Sheepie Whore
Sheepie Whore
Posts: 12082
Joined: Thu Jun 13, 2002 1:07 am 0
XBL Gamertag: itsthetaste
PSN: teamonkey_ca
Contact:

Post by teamonkey »

Or buy a Mini Mac instead.
User avatar
Firefox
Sheepie Whore
Sheepie Whore
Posts: 11412
Joined: Fri Apr 26, 2002 6:15 pm 0
Location: Sheffield

Post by Firefox »

teamonkey wrote:Or buy a Mini Mac instead.
You bastard! I was going to say that! :evil:



:wink: :lol:
User avatar
Louis G
Baaaaaa!
Baaaaaa!
Posts: 2594
Joined: Sun Jun 16, 2002 4:27 pm 0
XBL Gamertag: guts n gums
Yahoo Messenger: louismgavin
Location: Leicester, UK
Contact:

Post by Louis G »

Mr Dom wrote:I would reccomend AMD every time.

so try to get 400MHz memory, 333 at the very least, and 512MB at the very minimum (preferably 768 - its very cheap nowadays).

Where from where from.

Louis
Winehaus imports wines from South Germany. The Baden-Wurttemberg region makes dry reds and whites, and with its warmer climate, stylistically has much in common with Burgundy.

http://www.winehaus.co.uk
russel
Posts: 11
Joined: Thu Jan 13, 2005 3:20 am 0

hum

Post by russel »

Whow, I really like the atmosphere here... Surrounded by poets :lol:
So just my point of view about this topic... Intel sµcks, AMD rµles!!
User avatar
Elizian
Baaaaaaa!
Baaaaaaa!
Posts: 7071
Joined: Tue Apr 23, 2002 11:20 am 0
Yahoo Messenger: niimaur
Location: SE Northumberland
Contact:

Re: hum

Post by Elizian »

russel wrote:Whow, I really like the atmosphere here...
Welcome, russel, to the Image fluffiest Image forum Image in town :camel:
ASCII a silly question ... get a silly ANSI - Bog
Post Reply