If You Believe We Put A Man On The Moon

Inane baanter or words of wisdom - you decide...
User avatar
teamonkey
Sheepie Whore
Sheepie Whore
Posts: 12082
Joined: Thu Jun 13, 2002 1:07 am 0
XBL Gamertag: itsthetaste
PSN: teamonkey_ca
Contact:

Post by teamonkey »

zip accident wrote:However, for a given diameter of lens, magnification is inversely propotional to brightness (I don't know what the particular mathematical function is). There is an effect of this in every day camera usage. The maximum available aperture of a zoom lens will decline as you zoom in on a subject (though I suppose the manufacturer could make the zoomed in maximum aperture the maximum at all magnifications).
I'm not quite sure what you're talking about there. If the lens aperture decreases as you zoom into something then that must be a mechanical action, surely, as zooming is an adjustment of the focal length.

In general telescopes have prime lens, with any magnification and focussing done through eyepieces.
User avatar
zip accident
Sheepie Whore
Sheepie Whore
Posts: 13928
Joined: Sun Feb 20, 2005 1:58 pm 0
Location: Bristol, UK

Post by zip accident »

teamonkey wrote:

zooming is an adjustment of the focal length.
Thus changing the magnification, and done for that reason. It would take a mechanical action, which may actually be done in some lens systems (perhaps by gears or some such), to maintain a given 'f' number while changing the magnification.

Forget jargon, think physics.

If the item you want to photograph (or however you want to view it) is a plane in front of the lens at a distance x, and it is outputing y photons per second per square metre, if you are viewing more square metres, you will be getting more photons per second, so the image will be brighter. The wider your field of view, the lower the magnification, and the brighter the image.
"My way is the way of not fighting":- the book of Enter the Dragon.
User avatar
pogo
Sheepie Whore
Sheepie Whore
Posts: 14180
Joined: Tue Sep 10, 2002 8:28 pm 0
Yahoo Messenger: BrassSparrow
Location: County Durham

Post by pogo »

zip accident wrote:However, for a given diameter of lens, magnification is inversely propotional to brightness (I don't know what the particular mathematical function is). There is an effect of this in every day camera usage. The maximum available aperture of a zoom lens will decline as you zoom in on a subject (though I suppose the manufacturer could make the zoomed in maximum aperture the maximum at all magnifications).
Yes. As I noted in my posts the constraints on most photography are quite different. Both object movement and camera shake limit the exposure length. And the greater the magnification for a given lens and camera the less light reaches the CCD. That's why photographers use films with ISO 32, why long lenses have bigger apetures, why flash is used even though it ruins many settings, and why some lenses and cameras have expensive anti-shake mechanisms.

But in astronomy objects are so distant and dim that such tricks won't work - you still need very long exposures. Thankfully the things in the sky don't move, or move very slowly, so you just need to avoid camera/telescope shake. This may mean turning the telescope to compensate for the earth's rotation, but this isn't too difficult as the Earth spins slowly and predictably. After that you just expose your film or CCD for as long as is needed. The only limit is your patience.

Perhaps the best example, certainly the most extreme, is the Hubble Deep Field. It peered into deepest darkest space with 342 exposures of 15 - 40 minutes, over 10 days. It just kept on taking a picture until it had collected enough light to form an image:

Image
User avatar
Dvorak
Baaaaaa!
Baaaaaa!
Posts: 4560
Joined: Wed May 08, 2002 7:37 am 0
Yahoo Messenger: d3dxquaternion
Location: Germany

Post by Dvorak »

pogo wrote:After that you just expose your film or CCD for as long as is needed. The only limit is your patience.
Unfortunately not.
Even if you reduce other noise sources (earth movement, scintillation, thermodynamic noise, CCD read-out noise) the signal will always be subject to inherent poisson noise.
That is: the longer the exposure time, the blurrier.
For high-resolution, high-contrast images you need short exposure times.
>take off sunglasses
Seamen and fishermen alike swear to have heard voices in the rising tide. Inhuman screams, some of them say.
User avatar
pogo
Sheepie Whore
Sheepie Whore
Posts: 14180
Joined: Tue Sep 10, 2002 8:28 pm 0
Yahoo Messenger: BrassSparrow
Location: County Durham

Post by pogo »

Interesting. I had not come across Poisson Noise before, so have just read up on it. The maths is simple enough, and what it says is to counteract Poisson Noise you need longer exposures.

The longer your receiver is picking up photons the more signal it gets. The signal (i.e. the pciture you want) tends to reinforce itself over time, so builds up linearly with time. The noise intensity buids up with the square root of time as it cancels itself out more. So over time the signal to noise ratio increases, approximately with the square root of exposure time, leading to better picture quality with longer exposures.
User avatar
teamonkey
Sheepie Whore
Sheepie Whore
Posts: 12082
Joined: Thu Jun 13, 2002 1:07 am 0
XBL Gamertag: itsthetaste
PSN: teamonkey_ca
Contact:

Post by teamonkey »

zip accident wrote:Thus changing the magnification, and done for that reason. It would take a mechanical action, which may actually be done in some lens systems (perhaps by gears or some such), to maintain a given 'f' number while changing the magnification.
Oh, I see what you mean. Mostly when you're viewing something with a telescope you're striving for the biggest aperture possible. Reducing the aperture in a telescope is madness. :)

In a telescope you change the focal length to change the focal ratio, you don't change the focal length while maintaining the focal ratio.
zip-accident wrote:If the item you want to photograph (or however you want to view it) is a plane in front of the lens at a distance x, and it is outputing y photons per second per square metre, if you are viewing more square metres, you will be getting more photons per second, so the image will be brighter. The wider your field of view, the lower the magnification, and the brighter the image.
Sorry, I was meaning "brightness" as shorthand for surface brightness or "intensity per steradian" so we were both meaning the same thing. :)
User avatar
toxibunny
Baaaaaaa!
Baaaaaaa!
Posts: 5906
Joined: Thu Jun 17, 2004 11:59 pm 0
Location: limb clock land

Post by toxibunny »

pogo wrote: Perhaps the best example, certainly the most extreme, is the Hubble Deep Field. It peered into deepest darkest space with 342 exposures of 15 - 40 minutes, over 10 days. It just kept on taking a picture until it had collected enough light to form an image:

Image
what's the story with this picture? it's a very small field of view photograph of space, exposed and processed enough to prove that there are indeed fucking loads of galaxies out there?

is it, in effect, just a photograph, and not an 'artists impression'?

edit: DOH! should have read the link first...
nearly four billion times fainter than the limits of human vision.
wow.
Though the field is a very small sample of sky area it is considered representative of the typical distribution of galaxies in space
8O

I've been hoping this picture would be reposted for a while now... cheers for the link. I hope there's a high-res version - I want a poster...
I made a deviantart page.
'....The baron is a gay old rogue with an eye for the ladies....'
User avatar
Dvorak
Baaaaaa!
Baaaaaa!
Posts: 4560
Joined: Wed May 08, 2002 7:37 am 0
Yahoo Messenger: d3dxquaternion
Location: Germany

Post by Dvorak »

pogo wrote:Interesting.
Interesting way to say "Bollocks", which would've been more appropriate... :wink:
pogo wrote:I had not come across Poisson Noise before, so have just read up on it. The maths is simple enough, and what it says is to counteract Poisson Noise you need longer exposures.

The longer your receiver is picking up photons the more signal it gets. The signal (i.e. the pciture you want) tends to reinforce itself over time, so builds up linearly with time. The noise intensity buids up with the square root of time as it cancels itself out more. So over time the signal to noise ratio increases, approximately with the square root of exposure time, leading to better picture quality with longer exposures.
You're right of course. On my way home I thought about the post I made and I went 8O :roll: :oops: in approximately this order.
Sorry, it has been a long day yesterday.

Actually there are limiting factors (especially with CCDs) with regards to exposure time, but poisson noise lays some constraints on the minimum amounts of photons you have to collect for a desired signal/noise ratio. Not the maximum.
>take off sunglasses
Seamen and fishermen alike swear to have heard voices in the rising tide. Inhuman screams, some of them say.
Post Reply