Official Nintendo Fanboy Smugness & Gloating Thread

Inane baanter or words of wisdom - you decide...
Post Reply
User avatar
Bubba
Sheepie Whore
Sheepie Whore
Posts: 10013
Joined: Tue Apr 22, 2003 12:52 pm 0
XBL Gamertag: BubbaFatAss
PSN: BubbaFatAs
Location: Cambridge

Post by Bubba »

Darkflame wrote:err..I never said per game!
I certainly think having multiple codes is stupid.A One user-ID system is all I thinks needed.
(note: I would personal prefer a unique number-base ID number, so I can then call myself what I want for each game. I dont like it when I have to be TWDarkflam in games)

I meant a pin to indentify a user, and Nintendo keeps a database of what VC games are tied to that number.

I want to be able to bring VC games to a friends house without dragging the system over. (dont care how small it is).

Having you able to login and play the games anywhere would be much nicer, imo, then having it tied to a system.
Yeah, sorry DF - it wasn't directed at you at all :) Previous pages (that were rapidly withdrawn from the ninty site) mentioned friend codes on a per game basis which is IMHO an awful idea. An individual "friend code" would be cool, and would provide an answer to taking VC games with you!

Cheers

Bubba
||Work || Flickr||
User avatar
GeeZa
Baaaaaaa!
Baaaaaaa!
Posts: 7156
Joined: Thu Aug 07, 2003 5:04 pm 0
Location: Taghazout.

Post by GeeZa »

Bubba wrote:
Darkflame wrote:err..I never said per game!
I certainly think having multiple codes is stupid.A One user-ID system is all I thinks needed.
(note: I would personal prefer a unique number-base ID number, so I can then call myself what I want for each game. I dont like it when I have to be TWDarkflam in games)

I meant a pin to indentify a user, and Nintendo keeps a database of what VC games are tied to that number.

I want to be able to bring VC games to a friends house without dragging the system over. (dont care how small it is).

Having you able to login and play the games anywhere would be much nicer, imo, then having it tied to a system.
Yeah, sorry DF - it wasn't directed at you at all :) Previous pages (that were rapidly withdrawn from the ninty site) mentioned friend codes on a per game basis which is IMHO an awful idea. An individual "friend code" would be cool, and would provide an answer to taking VC games with you!

Cheers

Bubba
Totally agree.
User avatar
namor7
Baaaaa!
Baaaaa!
Posts: 1940
Joined: Mon Apr 11, 2005 8:56 am 0
Location: Seoul

Post by namor7 »

teamonkey wrote:
Jamesac wrote:I just hope they don't try to shoehorn Wii-mote controls in there.
Oh they will, never fear.

Starfox DS. Bah. :(
Starfox DS, my friend, is the bee's knees 8)
{{{"wicked is the witch that stands for nothing"}}}
User avatar
namor7
Baaaaa!
Baaaaa!
Posts: 1940
Joined: Mon Apr 11, 2005 8:56 am 0
Location: Seoul

Post by namor7 »

Joystiq wrote:IBM has announced that their Broadway chip custom-designed for Nintendo's Wii console has been in Nintendo's hands since July. "We have been shipping well within this quarter (July)," said Ron Martino, director of IBM Technology Collaboration Solutions. "In fact, we have shipped a significant volume in this quarter."

So what does this news mean to gamers who have been waiting patiently for a release date from Nintendo? Well, considering that Nintendo has had their hands on a large amount of the final Broadway chips since July, some might speculate that the Wii could be released by the end of the month.

Nintendo has also confirmed their reception of IBM's chip: "The first chips are in our possession," said Genyo Takeda, Senior Managing Director/General Manager, Integrated Research & Development Division, Nintendo Co., Ltd. "Today's milestone marks the final stage of our drive to reach both core and nontraditional gamers with an inviting, inclusive and remarkable gaming experience."

When I asked Martino about the power behind the Broadway chip, all he could do was compare it to the Wii's predecessor, the GameCube. "Compared to the Gekko in the GameCube, it's 20 percent more power efficient. It also performs significantly better. The key point is that it is Power Architecture-based and custom-made and optimized for Nintendo," he said. "This is a critical milestone for us at IBM. We have been very pleased with the entire development project."

We pressed Martino to compare Broadway to the other consoles they've had an integral part in developing for and he wouldn't budge, only commenting on what Nintendo was able to offer. With this news and Nintendo confirming the shipment of "6 million systems to retailers around the world between its launch in the fourth quarter of 2006 and the end of its fiscal year on March 31, 2007," we expect Nintendo to make an official announcement next week during their event in New York City.
http://www.joystiq.com/2006/09/08/shipm ... nt-of-pow/
{{{"wicked is the witch that stands for nothing"}}}
User avatar
Deckard
Sheepie Whore
Sheepie Whore
Posts: 10747
Joined: Fri Jun 18, 2004 11:27 pm 0
Location: Falmouth, Cornwall, UK

Post by Deckard »

Now with a new Mac Mini Pro so dont judge me !
User avatar
Deckard
Sheepie Whore
Sheepie Whore
Posts: 10747
Joined: Fri Jun 18, 2004 11:27 pm 0
Location: Falmouth, Cornwall, UK

Post by Deckard »

and from Gizmodo

"Our homedawgs over at Kotaku pulled a Gizmodo and had some super secret info saved up for a midnight post. So what's the big deal? IBM has confirmed that they have began shipping the "Broadway" chips for the Nintendo Wii to the fabrication plant in New York City ... three weeks ago. So what does all of this mumbo jumbo mean? Basically, Nintendo has start producing Wii's, meaning the release date may be sooner than expected.

The chips are being produced at IBM's 300mm semiconductor development and manufacturing plant in East Fishkill (what the hell kind of a city name is that?), New York—ironically, the same plant that is producing the PS3 chips. Hit up the Kotaku link below for more juicy details straight from the horse's Crecente's mouth. – Travis Hudson"

:)

(sorry about the previous post)
Now with a new Mac Mini Pro so dont judge me !
User avatar
Darkflame
Sheepie Whore
Sheepie Whore
Posts: 18236
Joined: Mon Mar 31, 2003 11:06 am 0
Location: Not the UK

Post by Darkflame »

Is good news, but I think its the controller manufactoring that will be slowing them down a tad.
Produceing the mobo and co is probably the easy bit.
User avatar
Roobarb
Baaaaa!
Baaaaa!
Posts: 1451
Joined: Mon Nov 14, 2005 2:37 pm 0
Location: Blighty

Post by Roobarb »

Darkflame wrote:Is good news, but I think its the controller manufactoring that will be slowing them down a tad.
Produceing the mobo and co is probably the easy bit.
I don't see why the controller is hard to make. Off the shelf parts, innit.
kotaku wrote:Power Architecture-based chips featuring IBM Silicon on Insulator technology at 90 nanometers...the chip is designed to consume about 20 percent less energy.
East Fishkill, where Broadway is being made is a 90nm, copper/SOI fab.
Gecko was built using 0.18 micrometre IBM copper-wire technology.

If the thing runs 20% cooler, what are the implications for how much more powerful MHz-wise Broadway could be over Gecko?

Assuming the architecture has remained similar, i'm guessing about double...
Last edited by Roobarb on Fri Sep 08, 2006 12:23 pm 0, edited 1 time in total.
User avatar
Bubba
Sheepie Whore
Sheepie Whore
Posts: 10013
Joined: Tue Apr 22, 2003 12:52 pm 0
XBL Gamertag: BubbaFatAss
PSN: BubbaFatAs
Location: Cambridge

Post by Bubba »

Roobarb wrote:If the thing runs 20% cooler, what are the implications for how much more powerful MHz-wise Broadway could be over Gecko?
Hmm - wouldn't have thought temperature had much to do with this. Surely it's down to whatever differences in the Power architecture varient they are using, and the clockspeed of the final part. Not that it'll really matter anyway - it's fast enough to keep the (rather weak IMHO) GPU fed with data and do a spot of physics / ai every now and again and will no doubt power some cool games.

In short, it's no Cell, but it really doesn't matter :)

Cheers

Bubba
||Work || Flickr||
User avatar
Roobarb
Baaaaa!
Baaaaa!
Posts: 1451
Joined: Mon Nov 14, 2005 2:37 pm 0
Location: Blighty

Post by Roobarb »

Well temperature is down to transistor leakage, is down to the manufacturing process, number of transistors, and switching frequency. Switching frequency has been the real killer in the last few years.

The thermal design power of Intel's chips increased significantly over the last few years as they played the MHz game (that has changed somewhat since they abandoned NetBurst).

If you know the power consumption, you can have a good guess at the MHz, assuming the transistor count will be similar and taking into account SoI/copper vs straight copper process.

Do we know much about the GPU yet, apart from it being another 90nm part (vs 180nm for Gamecube)?
User avatar
Kemper_Boyd
Sheepie Whore
Sheepie Whore
Posts: 11967
Joined: Wed Jul 31, 2002 9:15 pm 0

Post by Kemper_Boyd »

For current capaticance and voltage scaling factors they could probably
double the clock frequency at 80% of the Gecko's power. A dual core
design would offer better throughput.
User avatar
Darkflame
Sheepie Whore
Sheepie Whore
Posts: 18236
Joined: Mon Mar 31, 2003 11:06 am 0
Location: Not the UK

Post by Darkflame »

Roobarb wrote:
Darkflame wrote:Is good news, but I think its the controller manufactoring that will be slowing them down a tad.
Produceing the mobo and co is probably the easy bit.
I don't see why the controller is hard to make. Off the shelf parts, innit..
Anything that is never been put together in a certain way will cause manufacturing issues. Its not lego..it doesn't all fit perfectly ;)
Its just the way of the world.

Also, its all guess work on our part.
We don't know the prices's of the components involved, even if they are all of the shelf (which isnt known either).
They almost certainly havnt been mass produced on this scale before, which might cause more complications.

I would hope they are quality testing very much at this stage too.
The Wii controller at this stage needs much more testing then a normal controller. They need to make sure they are coming of the production lines working and giving consistent data.
I assume it needs a lens to focus light on the sensor, they have to make sure the lens are consistent so it works with the sensors calibration.


The manufacturing of the wiitroler is going to be significantly different to past controllers...meaning new production lines.
It all costs money.
Far more then simply changing a mold and adding a new stick or button.

I think your looking at this as a technical issue, where as I am seeing it from an engineering standpoint.
User avatar
Kemper_Boyd
Sheepie Whore
Sheepie Whore
Posts: 11967
Joined: Wed Jul 31, 2002 9:15 pm 0

Post by Kemper_Boyd »

Darkflame wrote: We don't know the prices's of the components involved, even if they are all of the shelf (which isnt known either).
They almost certainly havnt been mass produced on this scale before, which might cause more complications.
You are joking? Bluetooth, accelerometers and little cameras 'haven't been
mass produced on this scale before'? :lol:

You might like to take a trip to your local high street tomorrow.
User avatar
Roobarb
Baaaaa!
Baaaaa!
Posts: 1451
Joined: Mon Nov 14, 2005 2:37 pm 0
Location: Blighty

Post by Roobarb »

By 'off the shelf', i mean they are just customised variations of standard parts already available from their suppliers, so there should be no availability issues such as those affecting the Sony PS3 and availability of blue laser diodes (which is cutting edge semiconductor technology).

I don't see why manufacturing of the Wii controller is any more difficult than manufacturing a cheap as chips digital camera or mobile phone. And i don't see why manufacturing a cheap as chips digital camera or mobile phone is any more difficult than manufacturing a home console such as the Wii. Both require new tooling and production lines, and i'm sure the console has a bigger parts list...
User avatar
disciple
Sheepie Whore
Sheepie Whore
Posts: 13941
Joined: Mon Oct 27, 2003 11:33 pm 0
XBL Gamertag: LiberMentis
PSN: Prime_Heretic
Location: Greenfield
Contact:

Post by disciple »

"They're definitely not right," says Nintendo UK boss

Nintendo UK boss David Yarnton has told GamesIndustry.biz that reports the Wii will retail for GBP 149 and will be in shops shortly before November 24 are "definitely not right".

The claims, which appeared in an article by trade publication MCV, are "only speculation, and definitely not fact," according to Yarnton.

"They're not far off, but they're definitely not right," he told GI.biz.

As previously announced, Nintendo is holding a Wii press event in London next Friday, where it is set to reveal the official price point and launch date for the console.

"We will be announcing more details then," Yarnton confirmed.
http://www.gamesindustry.biz/content_page.php?aid=19573
PS4 : Prime_Heretic
Steam: bitstorm
Elite Dangerous: Cmdr Britain
Post Reply