Thanks for that!bobajob wrote:http://press.nintendo.com/wiipreview/
login : guest
password : nintendo.
Some nice downloads. Enjoy it while it lasts :-)
Official Nintendo Fanboy Smugness & Gloating Thread
Oh, of course, absolutely, USB is fantastic.Bubba wrote: USB wise, it's a really good ideaIt'll let you plug lots of stuff into it, whether it's iPods or Eyetoys, or a USB hard drive (which incidentally is much easier to support than any USB network adapters as all USB hard drives follow the mass storage system so it would just need a generic mass storage driver like the 360 does). Basically it's like the expansion ports from the bottom of the cube - you can plug any bit of hardware you want in to USB, as long as it's got a USB port
Of course, you can also talk to the Wii via Bluetooth, but that's stupidly slow (2mb/s or something?!) so useless for any high bandwidth activities.
My point was more originaly, Why have it if they arnt going to use it ?
So, imo, Hard Drive support is very probably indeed.
Ok, fair enough then.Thing is, I live in the studenty areas where if people realised there was free WiFi they'd torrent away to their hearts content on it. It's why I keep my WiFi locked down - I'd much rather leave it unencrypted but filtering out torrents / massive downloads.
I'm still curious as to why a "convertor" is needed for USB>Cat5.
I see 4 connectors in my USB socket.
Dosnt Cat5 have 4 wires?
Couldnt Nintendo just make a do-dad to change the shape, match the wires, and let the system alter the signals(/voltage?) when the dodad is inserted?
A dual Cat5/USB socket could be made without costing them anything more then a little software/firmware trickery no?
I know I am missing something big here, but what is it
-
want to read eye-wateringly bad stories? No? Ok.
want to read eye-wateringly bad stories? No? Ok.
oh, and talking of Cat5, this is neat:
http://www.myhometheater.homestead.com/vgacable.html
http://www.myhometheater.homestead.com/vgacable.html
-
want to read eye-wateringly bad stories? No? Ok.
want to read eye-wateringly bad stories? No? Ok.
- PurpleChair
- Baaaaaa!

- Posts: 2583
- Joined: Thu Sep 23, 2004 10:53 pm 0
- Location: Approaching the Gates
I don't really know about any of this, but I'm going to go out on a limb and start crying with laughter now.Darkflame wrote:I'm still curious as to why a "convertor" is needed for USB>Cat5.
I see 4 connectors in my USB socket.
Dosnt Cat5 have 4 wires?
Couldnt Nintendo just make a do-dad to change the shape, match the wires, and let the system alter the signals(/voltage?) when the dodad is inserted?
A dual Cat5/USB socket could be made without costing them anything more then a little software/firmware trickery no?
"I don't care if you're Bison or sheep! Saikyo style won't lose!"
Good grief O_O
In the new Metroid game...you actualy see other people....
In the new Metroid game...you actualy see other people....
-
want to read eye-wateringly bad stories? No? Ok.
want to read eye-wateringly bad stories? No? Ok.
yeah, I know its wrong, but if I dont ask why I'll be thinking about it all nightPurpleChair wrote:I don't really know about any of this, but I'm going to go out on a limb and start crying with laughter now.Darkflame wrote:I'm still curious as to why a "convertor" is needed for USB>Cat5.
I see 4 connectors in my USB socket.
Dosnt Cat5 have 4 wires?
Couldnt Nintendo just make a do-dad to change the shape, match the wires, and let the system alter the signals(/voltage?) when the dodad is inserted?
A dual Cat5/USB socket could be made without costing them anything more then a little software/firmware trickery no?
-
want to read eye-wateringly bad stories? No? Ok.
want to read eye-wateringly bad stories? No? Ok.
Darkflame wrote:yeah, I know its wrong, but if I dont ask why I'll be thinking about it all nightPurpleChair wrote:I don't really know about any of this, but I'm going to go out on a limb and start crying with laughter now.Darkflame wrote:I'm still curious as to why a "convertor" is needed for USB>Cat5.
I see 4 connectors in my USB socket.
Dosnt Cat5 have 4 wires?
Couldnt Nintendo just make a do-dad to change the shape, match the wires, and let the system alter the signals(/voltage?) when the dodad is inserted?
A dual Cat5/USB socket could be made without costing them anything more then a little software/firmware trickery no?
Sadly, USB and ethernet are very very different
I notice "Golin" and "Harris" also work still.Alarm wrote:Thanks for that!bobajob wrote:http://press.nintendo.com/wiipreview/
login : guest
password : nintendo.
Some nice downloads. Enjoy it while it lasts :-)
-
want to read eye-wateringly bad stories? No? Ok.
want to read eye-wateringly bad stories? No? Ok.
yes, but why?Roobarb wrote:Darkflame wrote:yeah, I know its wrong, but if I dont ask why I'll be thinking about it all nightPurpleChair wrote:I don't really know about any of this, but I'm going to go out on a limb and start crying with laughter now.Darkflame wrote:I'm still curious as to why a "convertor" is needed for USB>Cat5.
I see 4 connectors in my USB socket.
Dosnt Cat5 have 4 wires?
Couldnt Nintendo just make a do-dad to change the shape, match the wires, and let the system alter the signals(/voltage?) when the dodad is inserted?
A dual Cat5/USB socket could be made without costing them anything more then a little software/firmware trickery no?reminds of Steve Wozniak's lateral thinking to do colour on the cheap for the Apple II by twiddling some bits instead of buying a proper modulator.
Sadly, USB and ethernet are very very different
I see 4 bits of one wire, and 4 bits of another wire.
Ignoreing what *should* go down the wire, cant you just connect them together and let the internal board just change what its sending out?
Or dosnt a machine have that degree of controll over it ? (eg, down to that "what you are sending down each pin" level)
-
want to read eye-wateringly bad stories? No? Ok.
want to read eye-wateringly bad stories? No? Ok.
Coming back to the point you made earlier:
But they're charging just over twice the price of the current Gamecube for the hardware in the Wii box. I struggle to see it's going to cost more than 50% more than Gamecube to make. R&D costs for what is a Gamecube V1.5 + a new wand + a few bits of new firmware and integrating off the shelf USB / SD / 802.11 / Bluetooth is hardly going to be much per unit when amortised over millions of units. All i'm asking is they split the difference in the extra profits they're making, so i can put it towards an extra game
Anyway, more speculation: what is Broadway (Wii CPU) hiding?
http://www.embeddedrelated.com/usenet/e ... 5610-1.php
Don't disagree with what you're saying, although i think you're underestimating the importance of PS3 to Sony's bottom line, and strategic need for PS3 to make Blu-Ray a success. I'm not asking for Nintendo to heavily invest in hardware; I happen to like the route they've take with Wii in keeping costs down.Guru-Meditation wrote:One could say Nintendo are following smarter business practices. Microsoft and Sony can throw a lot at the console thing but if it fails then they have other investments keeping them afloat.
Nintendo makes games. That's about it. It'd be crippling for them if they heavily invested, sold for a loss, and failed. Look at Sega with the Saturn and Dreamcast. Nice machines, flopped, and all Sega do now is make games.
But they're charging just over twice the price of the current Gamecube for the hardware in the Wii box. I struggle to see it's going to cost more than 50% more than Gamecube to make. R&D costs for what is a Gamecube V1.5 + a new wand + a few bits of new firmware and integrating off the shelf USB / SD / 802.11 / Bluetooth is hardly going to be much per unit when amortised over millions of units. All i'm asking is they split the difference in the extra profits they're making, so i can put it towards an extra game
Anyway, more speculation: what is Broadway (Wii CPU) hiding?
http://www.embeddedrelated.com/usenet/e ... 5610-1.php
Because access to the physical layer is controlled by the chipset. And a USB chipset doesn't generally do ethernet PHYDarkflame wrote:yes, but why?
I see 4 bits of one wire, and 4 bits of another wire.
Ignoreing what *should* go down the wire, cant you just connect them together and let the internal board just change what its sending out?
Or dosnt a machine have that degree of controll over it ? (eg, down to that "what you are sending down each pin" level)


