720x480, direct from source, 30fps recording, 8.5 minutes.

Inane baanter or words of wisdom - you decide...
Post Reply
User avatar
PVB
Sheepie Whore
Sheepie Whore
Posts: 32542
Joined: Mon Apr 22, 2002 10:16 pm 0
XBL Gamertag: PVBuk
PSN: PVBuk
Location: Medway, U.K.

Post by PVB »

SiN wrote:Feature request! :)

T2K and I get along pretty well except for one problem ... I can never tell left from right! The buttons are mapped such that Left=clockwise and Right=counter-clockwise. That makes sense when you're at the bottom of the web. But when you're at the top, it doesn't make quite as much sense.

One solution would be to have the camera follow and rotate around our space giraffe ... if the player is always at the bottom of the screen, then the key mappings always make sense, right? I think the problem with that though, is the camera would move *way* to quickly.

Another solution is to have the analog stick act as a spinner ... so you'd move by making clockwise and counterclockwise circles with it.

Have you guys put any thought into something like this? And am I the only one who has these problems? :)


SiN
When you mention playing T2K with keys, I take it you're using an emulator?

If so, then you'd do well to get a gamepad, as it helps enormously. :)

Even with a D-pad or analog stick, you(I) still get a little confused when the player character is at the top of a continuous web, as pressing 'left' will make the craft move clock-wise, so from the top it will move 'right' and pressing 'right' will move it 'left'. :)
Spoongod
Sheepie Whore
Sheepie Whore
Posts: 14306
Joined: Mon Oct 06, 2003 11:43 am 0

Post by Spoongod »

PVB: Could be playing the PC version. :)

On the subject of that whole clockwise/counterclockwise thing, I used to laugh and then quickly become frustrated when friends didn't 'get' Micro Machine. They'd steer the wrong way because they could handle the fact that left and right were relative to the car i.e. clockwise/anticlockwise rather than 'my left'/'my right'.

I've since grown up and now realise that not everybody grew up playing Asteroids and its kin. :lol:
User avatar
gilesgoat
Sheepie Whore
Sheepie Whore
Posts: 27259
Joined: Wed Sep 03, 2003 7:54 am 0
Location: Monfalcone, Italy
Contact:

Post by gilesgoat »

PVB wrote:
SiN wrote:Feature request! :)

T2K and I get along pretty well except for one problem ... I can never tell left from right! The buttons are mapped such that Left=clockwise and Right=counter-clockwise. That makes sense when you're at the bottom of the web. But when you're at the top, it doesn't make quite as much sense.

One solution would be to have the camera follow and rotate around our space giraffe ... if the player is always at the bottom of the screen, then the key mappings always make sense, right? I think the problem with that though, is the camera would move *way* to quickly.

Another solution is to have the analog stick act as a spinner ... so you'd move by making clockwise and counterclockwise circles with it.

Have you guys put any thought into something like this? And am I the only one who has these problems? :)


SiN
When you mention playing T2K with keys, I take it you're using an emulator?

If so, then you'd do well to get a gamepad, as it helps enormously. :)

Even with a D-pad or analog stick, you(I) still get a little confused when the player character is at the top of a continuous web, as pressing 'left' will make the craft move clock-wise, so from the top it will move 'right' and pressing 'right' will move it 'left'. :)
I have to admit that is "my curse" as well :(

I always get confused despite is pretty logical .. on the other side to
implent a "reversion" when on top would probably create even more confusion and there's no simple solution to that.

Yes true the analog stick helps, yet it still takes a while to get used to that.

With open webs the problem is not existent and it's all fine, closed webs
is where the problem is.
Giles the billy goat
"Baa"
User avatar
Rod_S
Sheepie Whore
Sheepie Whore
Posts: 13474
Joined: Thu Jan 23, 2003 10:18 pm 0
Location: Badsville
Contact:

Post by Rod_S »

That's a real fucker on Gyruss as well.
Wanderer
Baaaaa!
Baaaaa!
Posts: 1209
Joined: Sat Jun 03, 2006 8:09 pm 0

Post by Wanderer »

Rod_S wrote:That's a real fucker on Gyruss as well.
Gyruss is great on the GBA btw :D
Wanderer
Baaaaa!
Baaaaa!
Posts: 1209
Joined: Sat Jun 03, 2006 8:09 pm 0

Post by Wanderer »

juice wrote:After some fairly prolonged tinkering, I've managed to get a 250mb DIVX avi (i.e. fairly decent quality) of SG uploaded to Stage6:
http://stage6.divx.com/members/184448/videos/1021582

Dunno if it's of use to anyone, but enjoy!
how do I download it locally?
User avatar
kalmar
Baaaaaaa!
Baaaaaaa!
Posts: 8293
Joined: Fri Jun 24, 2005 2:46 pm 0
Location: Fife

Post by kalmar »

Just watched the 90Mb film this morning, WOW! I hadn't been paying much attention so Space Giraffe until now because the screenshots didn't look like anything much, but given that Tempest X is pretty much my favorite game, I have to say that's looking bloody brilliant. Found myself grinning like a loon towards the end of certain levels and that's even without playing it.

Well done chaps, excellent job. The sound effects and tune are ace as well, I wasn't really expecting that on a WIP for some reason - Terminator sample in there?

I'll be going round my mate's who has an X-Box 360 as soon as this is out and bribing him a fiver to download it :D
User avatar
Yak
Sheepie Whore
Sheepie Whore
Posts: 20266
Joined: Wed Apr 17, 2002 10:22 am 0
Location: Wales
Contact:

Post by Yak »

With regard to the controls there isn't really much one can do except:

- Spin the whole surface so the giraffe is always at the bottom. When you move fast this would be ugly and confusing as hell since everything on screen would flail around.

- Try and do "Time Pilot/Gyruss" style controls - this might work as well as Gyruss/TP for surfaces that were actually circular, but even with those controls I find that I sometimes get caught out at the points where you transition from one quadrant to another. And on non-circular levels it wouldn't work properly anyway.

- Make it so that you have to push the stick in the direction the giraffe has to move on any given section of surface. Which would be a nightmare on anything but smoothly circular levels and make speedy transitions over bits of levels with any corners in impossible.

So you'll just have to get used to clockwise/anticlockwise. It worked fine for T2K after all and there is no better solution outside of a dedicated spinner.
Justified and Ancient.
User avatar
Mark
Baaaaaa!
Baaaaaa!
Posts: 3611
Joined: Mon Apr 22, 2002 7:53 pm 0
Location: England

Post by Mark »

Fidget! If you stop moving for any length of time you're giving your brain a chance to make a bad call. If you don't stop moving it doesn't get the chance. It's not always practical obviously, but if there's no danger then weaving and wiggling about works for me.
User avatar
juice
Baaaaa!
Baaaaa!
Posts: 1942
Joined: Thu Feb 03, 2005 9:37 pm 0
Location: Sheffield!
Contact:

Post by juice »

Wanderer wrote:
juice wrote:After some fairly prolonged tinkering, I've managed to get a 250mb DIVX avi (i.e. fairly decent quality) of SG uploaded to Stage6:
http://stage6.divx.com/members/184448/videos/1021582

Dunno if it's of use to anyone, but enjoy!
how do I download it locally?
Erm... when I access the page, I get a "play" and a "download" button displayed: is this not true for everyone else?
User avatar
juice
Baaaaa!
Baaaaa!
Posts: 1942
Joined: Thu Feb 03, 2005 9:37 pm 0
Location: Sheffield!
Contact:

Post by juice »

Yak wrote:- Spin the whole surface so the giraffe is always at the bottom. When you move fast this would be ugly and confusing as hell since everything on screen would flail around.
Smeg no! 8O
Yak wrote: - Try and do "Time Pilot/Gyruss" style controls - this might work as well as Gyruss/TP for surfaces that were actually circular, but even with those controls I find that I sometimes get caught out at the points where you transition from one quadrant to another. And on non-circular levels it wouldn't work properly anyway.
I've never liked the Gyruss control system, which is a shame, as I quite like the game :)
Yak wrote: - Make it so that you have to push the stick in the direction the giraffe has to move on any given section of surface. Which would be a nightmare on anything but smoothly circular levels and make speedy transitions over bits of levels with any corners in impossible.
You could try and do something similar to room-flipping 3d games (Resident Evil, etc): holding the direction key down will keep moving you in that direction regardless of camera/angle changes, but releasing the key resets the virtual compass. Probably needlessly complex, but hey.
Yak wrote: So you'll just have to get used to clockwise/anticlockwise. It worked fine for T2K after all and there is no better solution outside of a dedicated spinner.
Aye - never had any problems with it, meself!
User avatar
kalmar
Baaaaaaa!
Baaaaaaa!
Posts: 8293
Joined: Fri Jun 24, 2005 2:46 pm 0
Location: Fife

Post by kalmar »

How hard would it be to make a dedicated spinner for the 360? Could you get away with a wheel attached to a 360 degree pot or encoder, plug that into a modified original controller?
Then you'd have position-absolute control, for a few quid in parts.

The game would need to have an option to support it of course.

Here's an 8-bit encoder with 128 steps. You'd need to hook it to 8 buttons in the modified controller, or use the resistor ladder DAC to feed it to an analogue stick channel.

http://www.bourns.com/pdfs/ace.pdf

You could use a 360 degree pot instead, but they tend to only have 340 degree electrical rotation so there would be a spot where it isn't controllable, so I guess that's no good.

Just an idea :)
User avatar
gilesgoat
Sheepie Whore
Sheepie Whore
Posts: 27259
Joined: Wed Sep 03, 2003 7:54 am 0
Location: Monfalcone, Italy
Contact:

Post by gilesgoat »

kalmar wrote:How hard would it be to make a dedicated spinner for the 360? Could you get away with a wheel attached to a 360 degree pot or encoder, plug that into a modified original controller?
Then you'd have position-absolute control, for a few quid in parts.

The game would need to have an option to support it of course.

Here's an 8-bit encoder with 128 steps. You'd need to hook it to 8 buttons in the modified controller. Does it have that many?
http://www.bourns.com/pdfs/ace.pdf

You could use a 360 degree pot instead, but they tend to only have 340 degree electrical rotation so there would be a spot where it isn't controllable, so I guess that's no good.

If the encoder can't work with the controller, bung a PIC in between which generates an signal with PWM to feed to the pot channel.

Just an idea :)
Man, the problem is not really technical.

An encoder is a rotary controller and such, usually two pulses in quadrature.

The problem is "who writes a PC driver for it" and/or makes it HID compatible
and/or connects it to an USB port ?

To make the HW for it is "quite easy", is the SW the problem, unfortunatelly
I don't know (so far) anything about how you create a device driver
for Windows and I never touched the WDM SDK ..

That's the real problem.
Giles the billy goat
"Baa"
User avatar
Rod_S
Sheepie Whore
Sheepie Whore
Posts: 13474
Joined: Thu Jan 23, 2003 10:18 pm 0
Location: Badsville
Contact:

Post by Rod_S »

Yak wrote:With regard to the controls there isn't really much one can do except:

- Spin the whole surface so the giraffe is always at the bottom. When you move fast this would be ugly and confusing as hell since everything on screen would flail around.

- Try and do "Time Pilot/Gyruss" style controls - this might work as well as Gyruss/TP for surfaces that were actually circular, but even with those controls I find that I sometimes get caught out at the points where you transition from one quadrant to another. And on non-circular levels it wouldn't work properly anyway.

- Make it so that you have to push the stick in the direction the giraffe has to move on any given section of surface. Which would be a nightmare on anything but smoothly circular levels and make speedy transitions over bits of levels with any corners in impossible.
Or make it a text adventure.

- You are floating around a circular web-like construct. Bright flashing lights are oozing and throbbing in a psychedelic fashion around you. There is a strong feeling of adrenaline. What would you like to do?

- SHOOT SHIT!
User avatar
kalmar
Baaaaaaa!
Baaaaaaa!
Posts: 8293
Joined: Fri Jun 24, 2005 2:46 pm 0
Location: Fife

Post by kalmar »

gilesgoat wrote:
kalmar wrote:How hard would it be to make a dedicated spinner for the 360? Could you get away with a wheel attached to a 360 degree pot or encoder, plug that into a modified original controller?
Then you'd have position-absolute control, for a few quid in parts.

The game would need to have an option to support it of course.

Here's an 8-bit encoder with 128 steps. You'd need to hook it to 8 buttons in the modified controller. Does it have that many?
http://www.bourns.com/pdfs/ace.pdf

You could use a 360 degree pot instead, but they tend to only have 340 degree electrical rotation so there would be a spot where it isn't controllable, so I guess that's no good.

If the encoder can't work with the controller, bung a PIC in between which generates an signal with PWM to feed to the pot channel.

Just an idea :)
Man, the problem is not really technical.

An encoder is a rotary controller and such, usually two pulses in quadrature.

The problem is "who writes a PC driver for it" and/or makes it HID compatible
and/or connects it to an USB port ?

To make the HW for it is "quite easy", is the SW the problem, unfortunatelly
I don't know (so far) anything about how you create a device driver
for Windows and I never touched the WDM SDK ..

That's the real problem.
But Giles, if SG can work with an analogue stick, you can generate that analogue signal in any way you like, and it would need little or no difference in the game - no new drivers certainly.

The encoder I linked to is actually absolute, 8 bit gray code so you would simply convert that to an 0-3.3V signal and bung it into left-right on the joystick. Or you could connect it directly to 8 button inputs if you wanted to cheat.

Even if you use a 2 channel quadrature encoder (smoother, more steps), you can still convert it into an absolute analogue signal to feed to the game.

I'm not saying it's essential or anything, just that it might be neat as an option if someone wanted to make a tempest-arcade style table with authentic controls, for example, or for people who can't get on with the left-right action.
Post Reply