hairy_pete,
sorry, but you really are coming across a bit arrogant, don't you think ?
Again, your picture of this new world is wrong.
No it's not wrong. My view is just different from yours, and more like everyone else in the normal world.
There is no Front Side Bus - CPU and Northbridge are one chip.
The FSB is built into the chip on a 754, that doesn't mean I don't have full control over it regardless of how it's described in my BIOS.
Clock generation starts with a base frequency (what that silly BIOS sells you as "FSB"). HTT frequency is multiplied UP from there, so is CPU frequency - independent from each other. RAM bus frequency is divided DOWN from CPU frequency.
So for example, with an Athlon 3000+ and PC2700 RAM on socket-754, you got 200 MHz base frequeny, HTT on x4, CPU on x9, RAM on /11. When Cool&Quiet steps the CPU down to 800 MHz, it does so by changing the CPU multiplier to x4 and the RAM divider to /5.
If this had PC3200 RAM, then base clock input and RAM clock output would happen to be the same frequency - but the latter is not derived from the further, as was the case in northbridge-centric architectures.
Similarly to the temperature issues I mentioned above, all that BIOS mess is to present the users with terms they've heard of and "protect" them from having to comprehend new stuff. Your post is a fine demonstration of how this actually has the opposite effect.
Thanks for patronising post, hp.
I'm fully aware of what and how it works.
The thing is, 99% of users don't use "I suddenly think I'm an AMD A64 engineer" jargon, and tend to use things like FSB, RAM dividers, etc...
Something, I was just trying to point out, rather than coming off as a prick.
You will also see that 99% of what you posted means jack when you are in your BIOS tweaking your PC. Whereas, what I posted relates to today's motherboard's and the BIOS. And NOT to how the A64 really works.