Disabling fans on graphics cards

Inane baanter or words of wisdom - you decide...
User avatar
piku
Sheepie Whore
Sheepie Whore
Posts: 20960
Joined: Wed Apr 24, 2002 10:44 am 0
Website: Http://Www.ncot.uk
Location: Wakefield
Contact:

Disabling fans on graphics cards

Post by piku »

Someone I know has an ATI 1650 card with 512MB of ram. He says the fan is loud and somewhat irritating.

If he unplugs the fan, will the card suffer damage if he does? If so, can it be replaced with a quieter one?
return (0);
User avatar
Dio
Sheepie Whore
Sheepie Whore
Posts: 18887
Joined: Mon May 31, 2004 1:08 pm 0
Location: Newcastle UK

Post by Dio »

Yes, the card will die within seconds of starting any 3D application. Possibly permanently.

You can get quiet HSF combos for 'em for about £15.

A less recommended option is to unplug the fan and stick a massive 120mm fan blowing over it. But that might still have problems.
User avatar
Nintendodragon
Baaaa!
Baaaa!
Posts: 995
Joined: Fri May 09, 2003 10:29 am 0
Location: Milton Keynes (sadly)
Contact:

Post by Nintendodragon »

or a heat pipe?
Stay awake, stand firm, and grow mighty Unexpected Lines.
User avatar
Dungeon-Dave
Baaaaaa!
Baaaaaa!
Posts: 3925
Joined: Thu Aug 04, 2005 12:01 pm 0
Location: UK
Contact:

Re: Disabling fans on graphics cards

Post by Dungeon-Dave »

piku wrote:If he unplugs the fan, will the card suffer damage if he does?
Very possibly. The chip gets hot, the heatsink conducts heat away from the chip and the fan blows the hot air around the heatsink away. If he has a good enough heatsink and a lousy fan then there's a chance unplugging the fan will make so little difference no damage is incurred... but I wouldn't bet on it.
piku wrote:If so, can it be replaced with a quieter one?
Yup. Zalman make replacement fans that are larger and rotate more slowly, thus being quieter. Tom's Hardware and various overclocking forums will have some reported successes/failures with makes and models.
User avatar
WiteWulf
Sheepie Whore
Sheepie Whore
Posts: 10125
Joined: Mon Aug 23, 2004 11:20 am 0
PSN: WiteWulf
Location: Loughborough(ish)

Re: Disabling fans on graphics cards

Post by WiteWulf »

piku wrote:If he unplugs the fan, will the card suffer damage if he does?
Nah...they just put the fans on there to irritate the users. It'll be fine without. For extra quiet computing, get rid of the one on the CPU and the big fat one in the PSU, too. You'll thank yourself for it...

"Ban Request WiteWulf" to save someone else the bother...
:::G:::

PSN: WiteWulf
Switch: SW-3941-2878-7584
Steam: WITEWULF66
adam
Baaaaaa!
Baaaaaa!
Posts: 4418
Joined: Sat Jun 24, 2006 9:15 pm 0

Post by adam »

a friend of mine took all the fans out of his home server (already an old machine a p1 i think), and it lasted for 2 years 24/7 use until the hard drive conked out
User avatar
HippyDave
Baaaa!
Baaaa!
Posts: 529
Joined: Thu Jun 13, 2002 8:13 am 0
Location: Worcestershire, UK
Contact:

Post by HippyDave »

Defo seems to be a general problem/liability with some ATI boards - I've got one in my Dell, and Great Zarquon it's loud. I mean, fighter jet over the Middle East loud! :?
"...a chicken vindaloo, kamikaze hot, with a fire extinguisher on standby."
User avatar
WiteWulf
Sheepie Whore
Sheepie Whore
Posts: 10125
Joined: Mon Aug 23, 2004 11:20 am 0
PSN: WiteWulf
Location: Loughborough(ish)

Post by WiteWulf »

To be serious for a moment, I was reinstalling XP on my Dad's PC at the weekend and he complained that the fan was loud. Turned out it was the one on the gfx card making all the noise so I carefully peeled off the sticker on top of the fan to reveal the bearing inside and put a couple of drops of 3-in-1 oil in there. It ran silently after that.
:::G:::

PSN: WiteWulf
Switch: SW-3941-2878-7584
Steam: WITEWULF66
User avatar
Nintendodragon
Baaaa!
Baaaa!
Posts: 995
Joined: Fri May 09, 2003 10:29 am 0
Location: Milton Keynes (sadly)
Contact:

Post by Nintendodragon »

PLEASE HELP!

My PC used to run very quietly and only having been on for a long time would the fans start to go faster and make more noise..

then it started being noisy from the moment you turned it on and the then one day It started smelling like burning.. I tonld my brother not to use it but he's addicted to rune scape and Played it until it died and wouldnt turn on any more..

turned out to be the PSU..

Ok so replaced that and it worked beautifully, very quietly, for a few months. now its making alot of noise again and the fans run at full from the moment you turn it on... Whats going on??
Stay awake, stand firm, and grow mighty Unexpected Lines.
User avatar
WiteWulf
Sheepie Whore
Sheepie Whore
Posts: 10125
Joined: Mon Aug 23, 2004 11:20 am 0
PSN: WiteWulf
Location: Loughborough(ish)

Post by WiteWulf »

Check the heat sinks and fan enclosures for build up of fluff and dust. If they're mucky give them a clean out with atooth bursh or something, should help.
:::G:::

PSN: WiteWulf
Switch: SW-3941-2878-7584
Steam: WITEWULF66
User avatar
Dungeon-Dave
Baaaaaa!
Baaaaaa!
Posts: 3925
Joined: Thu Aug 04, 2005 12:01 pm 0
Location: UK
Contact:

Post by Dungeon-Dave »

HippyDave wrote:Defo seems to be a general problem/liability with some ATI boards
Someone told me that ATI just make the chips, it's other manufacturers that make boards (ASus, MSI, etc) and there can be quite a difference in final quality.

When I bought my nVidia card, I was warned off certain brands due to noisy/inadequate cooling systems. Think I went with Gainward in the end.
User avatar
Purple Grapefruit
Baaaaaa!
Baaaaaa!
Posts: 2427
Joined: Sun Jan 29, 2006 10:41 pm 0
Location: London UK..........Off at a tangent

Post by Purple Grapefruit »

User avatar
Dio
Sheepie Whore
Sheepie Whore
Posts: 18887
Joined: Mon May 31, 2004 1:08 pm 0
Location: Newcastle UK

Post by Dio »

Yeah, there's plenty of quiet ATI boards - even the very high end ones are typically good, I've got a 1950XTX in a near-silent PC. It's quieter than the Sky+ box except when really nailing the 3D, and even then it's 'a bit of fan noise'.
User avatar
chris4500uk
Baaaaa!
Baaaaa!
Posts: 1158
Joined: Thu Feb 26, 2004 3:05 am 0
Location: Middlesbrough, UK
Contact:

Post by chris4500uk »

you could always run it at 5v instead of 12v, this would slow the fan down,

i wouldn't try it like...... booom
User avatar
piku
Sheepie Whore
Sheepie Whore
Posts: 20960
Joined: Wed Apr 24, 2002 10:44 am 0
Website: Http://Www.ncot.uk
Location: Wakefield
Contact:

Post by piku »

Purple Grapefruit wrote:POOTER CARNAGE!!!!

http://video.google.co.uk/videoplay?doc ... &plindex=1
Cool, I could heat my bathwater with some of those.
return (0);
Post Reply